Run Window Grille and Muntin Insertion Inspection — Free

Inspection Setup and Unit Identification

Unit identification matches traveler, work order, or lot record critical (required)

Yes No N/A

Inspection stage confirmed

Reference sample, drawing, or approved standard available at point of inspection

Yes No N/A

Inspection area provides adequate lighting and clean viewing surface

Yes No N/A

Grille and Muntin Alignment

Grille or muntin members are straight and visually aligned critical (required)

Yes No N/A

Pattern spacing is uniform across horizontal and vertical members critical (required)

Yes No N/A

Grille or muntin is centered within the IG airspace or sash opening as specified critical (required)

Yes No N/A

No visible tilt, skew, or offset is present

Yes No N/A

Member intersections and joints appear consistent and properly seated

Yes No N/A

Retention and Fit

Grille or muntin is securely retained and does not move when lightly tested critical (required)

Yes No N/A

No rattling, loose fit, or vibration is detected during gentle handling critical (required)

Yes No N/A

Retention clips, spacers, or attachment points are present and seated as specified critical (required)

Yes No N/A

Cosmetic Quality and Visible Defects

No scratches, dents, bends, or coating damage visible on grille or muntin surfaces

Yes No N/A

No chips, cracks, contamination, or debris visible in the IG airspace or around the sash-mounted grille critical (required)

Yes No N/A

Color, finish, and appearance are consistent with approved sample

Yes No N/A

No visible gaps, uneven reveals, or end-condition defects are present

Yes No N/A

Final Disposition and Sign-Off

Inspection result critical (required)

Note (optional)

Non-conformance or deficiency description

Inspector signature critical (required)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Window Grille and Muntin Insertion Inspection

Inspection Setup and Unit Identification

Grille and Muntin Alignment

Retention and Fit

Cosmetic Quality and Visible Defects

Final Disposition and Sign-Off

Get your results