Run Raw Water Intake and Screen Inspection — Free

Inspection Details and Site Identification

Inspection date and time recorded

Intake location, structure ID, or station identified

Inspector name and role documented

Weather, water level, or flow conditions noted if relevant

Inspection performed under required access controls and PPE critical (required)

Verify site-specific PPE and access controls were followed before entering the intake area.

Yes No N/A

Raw Water Intake Structure Condition

Intake structure free of visible damage, cracking, corrosion, or displacement critical (required)

Inspect concrete, steel, grating, housings, and support members for damage that could affect structural integrity or flow.

Yes No N/A

Photo evidence (optional)

Access platforms, ladders, and walkways secure and unobstructed critical (required)

Yes No N/A

Signs of erosion, undermining, leakage, or unusual seepage observed critical (required)

Yes No N/A

Photo evidence (optional)

Trash racks, grates, and protective barriers intact and properly seated critical (required)

Yes No N/A

Debris accumulation at intake structure

Estimate the percentage of visible intake opening or screen area affected by debris.

Screen Condition and Flow Obstruction

Screens clear of leaves, sticks, algae, trash, or other debris critical (required)

Verify the screen face and surrounding area are not obstructed by material that could reduce intake capacity.

Yes No N/A

Photo evidence (optional)

Screen damage, tears, bent bars, or missing sections observed critical (required)

Yes No N/A

Photo evidence (optional)

Screen differential pressure or headloss within acceptable operating range critical (required)

Record the measured differential pressure or headloss across the screen if instrumented.

Screen cleaning mechanism operating normally critical (required)

Verify traveling screens, brushes, spray systems, or rakes operate without binding, unusual noise, or missed cycles.

Yes No N/A

Bypass, overflow, or bypass channel free of blockage critical (required)

Yes No N/A

Pump and Mechanical Condition

Raw water pump operating without abnormal vibration or noise critical (required)

Listen and observe for cavitation, bearing noise, misalignment, or other abnormal conditions.

Yes No N/A

Pump suction and discharge lines free of visible leaks critical (required)

Yes No N/A

Photo evidence (optional)

Pump seals, couplings, and guards in good condition critical (required)

Yes No N/A

Pump suction pressure or flow rate within expected operating range

Record the current operating value if available from local instrumentation or control system.

Operational Status, Notifications, and Sign-Off

Any abnormal conditions, alarms, or restrictions reported to operations or maintenance critical (required)

Document whether issues were escalated according to site procedure.

Yes No N/A

Corrective actions initiated for any deficiency or non-conformance

List work order numbers, temporary controls, or follow-up actions for any observed issue.

Inspector signature

Supervisor or reviewer acknowledgment

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Raw Water Intake and Screen Inspection

Inspection Details and Site Identification

Raw Water Intake Structure Condition

Screen Condition and Flow Obstruction

Pump and Mechanical Condition

Operational Status, Notifications, and Sign-Off

Get your results