Run Medium Voltage Switchgear Assembly Quality Inspection — Free

Inspection Identification

Equipment identification matches job traveler and drawings critical (required)

Yes No N/A

Inspection date, inspector, and work order recorded

Switchgear lineup and section count verified critical (required)

Yes No N/A

Inspection stage confirmed as pre-test / pre-energization

Busbar and Conductor Assembly

Busbar connection torque verified against specification critical (required)

Note (optional)

Busbar joints show no looseness, distortion, or missing hardware critical (required)

Yes No N/A

Busbar alignment and support are secure and consistent

Yes No N/A

Insulating barriers, boots, and covers installed where required critical (required)

Yes No N/A

No visible overheating, contamination, corrosion, or damage on conductors

Yes No N/A

Photo evidence (optional)

Clearances, Creepage, and Internal Arrangement

Phase-to-phase and phase-to-ground clearances are unobstructed and compliant critical (required)

Yes No N/A

Photo evidence (optional)

Creepage paths are free of debris, sharp edges, and foreign material

Yes No N/A

Internal wiring is routed neatly and does not compromise clearances

Yes No N/A

No tools, loose hardware, or packaging materials remain inside enclosure critical (required)

Yes No N/A

Labeling, Nameplates, and Identification

Main nameplate and equipment labels are installed and legible critical (required)

Yes No N/A

Phase labels and circuit designations match drawings critical (required)

Yes No N/A

Warning labels and arc-flash labels are present where specified

Yes No N/A

Control devices, terminals, and components are identified consistently

Yes No N/A

Mechanical Freedom and Functional Fit

Doors, covers, and access panels open and close without binding critical (required)

Yes No N/A

Interlocks, latches, and hardware operate smoothly and correctly critical (required)

Yes No N/A

Withdrawable or moving components travel freely through full range critical (required)

Yes No N/A

Photo evidence (optional)

No rubbing, scraping, or interference observed during manual operation

Yes No N/A

Workmanship, Cleanliness, and Final Release

Workmanship is neat, consistent, and free of obvious defects

Wiring terminations are secure, dressed, and properly supported critical (required)

Yes No N/A

Enclosure interior is clean and free of dust, metal shavings, and debris

Yes No N/A

Inspection disposition critical (required)

Note (optional)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Medium Voltage Switchgear Assembly Quality Inspection

Inspection Identification

Busbar and Conductor Assembly

Clearances, Creepage, and Internal Arrangement

Labeling, Nameplates, and Identification

Mechanical Freedom and Functional Fit

Workmanship, Cleanliness, and Final Release

Get your results