Run Final Window and Door Unit Functional Audit Before Shipment — Free

Inspection Setup and Unit Identification

Unit model, size, and serial/job number match the shipping order critical (required)

Yes No N/A

Inspection area is clean, well lit, and free of obstructions

Yes No N/A

Inspector confirms product type

Note (optional)

Reference work order or traveler number

Functional Operation

Sash, panel, or leaf opens and closes smoothly without binding critical (required)

Yes No N/A

Lock, latch, or multipoint hardware engages and releases correctly critical (required)

Yes No N/A

Handles, operators, hinges, rollers, or pivots function as intended

Yes No N/A

Unit closes flush and seals properly at contact points

Yes No N/A

Measured operating force is within internal specification

Hardware and Component Verification

All specified hardware is installed and matches the bill of materials critical (required)

Yes No N/A

Fasteners, screws, and mounting points are secure

Yes No N/A

Hardware finish is free from corrosion, damage, or visible defects

Yes No N/A

Required accessories are present

Note (optional)

Missing or damaged hardware count

Glazing and Seal Condition

Glass is free from cracks, chips, scratches, or breakage critical (required)

Yes No N/A

Glazing beads, stops, and retainers are properly seated critical (required)

Yes No N/A

Sealant, gasket, and weatherseal condition is acceptable

Yes No N/A

No visible fogging, contamination, or foreign material inside glazing cavity

Yes No N/A

Cosmetic and Finish Audit

Paint, stain, anodize, or laminate finish is uniform and acceptable

Yes No N/A

No dents, scratches, gouges, cracks, or surface damage are visible critical (required)

Yes No N/A

Corners, edges, and frame members are free from visible defects

Yes No N/A

Cosmetic defect count

Labeling, Packaging, and Shipment Release

Product label, job tag, and shipping identification are present and legible critical (required)

Yes No N/A

Packaging, corner protection, and wrapping are intact

Yes No N/A

Unit is approved for shipment critical (required)

Note (optional)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Final Window and Door Unit Functional Audit Before Shipment

Inspection Setup and Unit Identification

Functional Operation

Hardware and Component Verification

Glazing and Seal Condition

Cosmetic and Finish Audit

Labeling, Packaging, and Shipment Release

Get your results