Run Extrusion Cross-Section Dimensional Sampling Inspection — Free

Inspection Identification and Sampling Plan

Job, press, alloy, and profile revision identified critical (required)

Sampling point recorded critical (required)

Reference print or approved drawing available at inspection station critical (required)

Yes No N/A

Measurement method and tool identified

Note (optional)

Measuring tool calibration status verified critical (required)

Yes No N/A

Profile Setup and Sample Condition

Sample is cut cleanly and cross-section is readable critical (required)

Yes No N/A

Sample orientation matches the print reference orientation critical (required)

Yes No N/A

Burrs, distortion, or cut damage do not interfere with measurement critical (required)

Yes No N/A

Sample identification matches the lot or run being inspected critical (required)

Yes No N/A

Photo of sample cross-section attached

Critical Dimensional Measurements

Wall thickness at primary critical location critical (required)

Wall thickness at secondary critical location critical (required)

Overall profile width critical (required)

Overall profile height critical (required)

Critical feature location or slot width

Measured dimensions recorded against nominal and tolerance critical (required)

Process Drift and Trend Review

Current measurements are within print tolerance critical (required)

Yes No N/A

No upward or downward trend observed versus prior sample

Yes No N/A

Note (optional)

Die, press, or quench adjustment required

Yes No N/A

Out-of-tolerance condition escalated to supervisor or quality critical (required)

Yes No N/A

Disposition and Corrective Action

Disposition selected critical (required)

Note (optional)

Containment action documented for affected material

Corrective action owner and due date recorded

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Extrusion Cross-Section Dimensional Sampling Inspection

Inspection Identification and Sampling Plan

Profile Setup and Sample Condition

Critical Dimensional Measurements

Process Drift and Trend Review

Disposition and Corrective Action

Get your results