Run Dedicated Outdoor Air System Functional Test — Free

Test Setup and System Identification

DOAS unit identification matches commissioning plan and sequence of operations critical (required)

Yes No N/A

Test instruments are calibrated and within current certification date critical (required)

Yes No N/A

System is in the intended test mode with BAS overrides documented critical (required)

Yes No N/A

Outdoor air, exhaust air, and supply air paths are accessible for measurement

Yes No N/A

Outdoor Airflow Verification

Measured outdoor airflow meets design minimum critical (required)

Outdoor airflow deviation from design is within tolerance critical (required)

Outdoor air damper modulates smoothly through commanded positions critical (required)

Yes No N/A

Outdoor air sensor reading is stable and reasonable relative to measured flow

Yes No N/A

Exhaust Air Recovery Effectiveness

Energy recovery device operates when enabled by sequence of operations critical (required)

Yes No N/A

Exhaust air recovery effectiveness meets project acceptance criteria critical (required)

No abnormal bypass, leakage, frost, or condensate issues observed at recovery section critical (required)

Yes No N/A

Exhaust and relief air paths are balanced and free of obstruction

Yes No N/A

Zone Terminal Unit Integration

Zone terminal units receive intended outdoor air or ventilation command critical (required)

Yes No N/A

Zone terminal unit dampers and reheat respond correctly to DOAS mode changes critical (required)

Yes No N/A

Ventilation reset or occupied/unoccupied logic follows sequence of operations

Yes No N/A

No zone reports simultaneous heating and cooling caused by DOAS control interaction

Yes No N/A

Controls, Alarms, and Safety Interlocks

Freeze protection, smoke shutdown, and fan proof interlocks operate as intended critical (required)

Yes No N/A

Required alarms are annunciated at BAS and local interface

Yes No N/A

No active unresolved deficiencies remain at end of test

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Dedicated Outdoor Air System Functional Test

Test Setup and System Identification

Outdoor Airflow Verification

Exhaust Air Recovery Effectiveness

Zone Terminal Unit Integration

Controls, Alarms, and Safety Interlocks

Get your results