Run BESS Commissioning Test Record — Free

Inspection Details and System Identification

Project name, site address, and inspection date recorded critical (required)

BESS system make, model, serial number, and installed capacity documented critical (required)

Commissioning scope matches approved drawings, one-line diagram, and equipment schedule critical (required)

Yes No N/A

Inspector, commissioning lead, and AHJ representative identified

Pre-commissioning prerequisites complete and work area released for testing critical (required)

Yes No N/A

Installation Verification and Pre-Energization Safety

Equipment installed in accordance with manufacturer instructions and approved layout critical (required)

Yes No N/A

Access clearances, working space, and egress routes unobstructed critical (required)

Yes No N/A

Labels, hazard signage, and emergency shutdown placards installed and legible critical (required)

Yes No N/A

Photo evidence (optional)

Lockout-tagout applied to all required energy sources before testing critical (required)

Yes No N/A

PPE selected for energized work and arc-flash boundaries verified critical (required)

Yes No N/A

Electrical and Control System Checks

Insulation resistance or continuity test results recorded critical (required)

Note (optional)

Grounding and bonding verified against design requirements critical (required)

Yes No N/A

Battery management system communications and status signals verified critical (required)

Yes No N/A

Inverter, PCS, and controller start/stop logic functions correctly critical (required)

Yes No N/A

Control system time stamps, event logs, and alarm history captured

Note (optional)

Safety System Functional Tests

Emergency stop or emergency shutdown circuit operates as intended critical (required)

Yes No N/A

Photo evidence (optional)

Overtemperature, overvoltage, undervoltage, and fault alarms activate at setpoints critical (required)

Yes No N/A

Automatic shutdown or isolation occurs on simulated critical fault critical (required)

Yes No N/A

Ventilation, smoke detection, and gas detection interfaces verified critical (required)

Yes No N/A

Fire alarm, suppression, and monitoring signals transmit to the supervising station or panel critical (required)

Yes No N/A

Photo evidence (optional)

UL 9540A and NFPA 855 Documentation Review

UL 9540A test report or applicable system-level fire test documentation available critical (required)

Yes No N/A

NFPA 855 installation and commissioning documentation complete critical (required)

Yes No N/A

AHJ-required permits, approvals, and variance conditions satisfied critical (required)

Yes No N/A

Any deviations, non-conformances, or open punch-list items documented

Corrective Actions and Final Sign-Off

Deficiencies recorded with responsible party and target completion date critical (required)

Retest required items identified

Yes No N/A

Commissioning status critical (required)

Note (optional)

Inspector signature critical (required)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: BESS Commissioning Test Record

Inspection Details and System Identification

Installation Verification and Pre-Energization Safety

Electrical and Control System Checks

Safety System Functional Tests

UL 9540A and NFPA 855 Documentation Review

Corrective Actions and Final Sign-Off

Get your results