Post-Repair ADAS Calibration Verification Log

Inspection log for verifying post-repair ADAS static and dynamic calibrations after collision repair, including scan tool report review and closed repair order attachment.

Inspection Details

• Repair order number recorded
  Enter the closed RO number associated with the repaired vehicle.
• Vehicle identification recorded
  Record the vehicle year, make, model, and VIN or last 8 digits of VIN.
• Inspection date and time recorded
  Document when the post-repair ADAS verification was completed.
• Inspector name recorded
  Identify the technician, calibrator, or inspector completing the verification.
• Repair type includes ADAS-related work
  Select all repair categories that may affect ADAS operation.

Pre-Verification Readiness

• Manufacturer repair instructions reviewed
  Confirm calibration and verification steps were performed according to OEM procedures for the specific vehicle.
• Required calibration environment met
  Verify the work area and conditions met the OEM requirements for static or dynamic calibration.
• Pre-scan completed before calibration
  Confirm a diagnostic pre-scan was performed and any relevant DTCs were addressed before verification.
• Post-repair scan tool report available
  Confirm the scan tool report is available for review and attachment to the closed RO.

Static Calibration Verification

• Static calibration performed for required sensors
  Select each ADAS system that required static calibration and was verified.
• Static calibration targets and setup verified
  Confirm targets, distances, heights, alignment, and vehicle positioning matched OEM specifications.
• Static calibration completed without unresolved DTCs
  Verify the calibration completed successfully and no unresolved diagnostic trouble codes remain related to the calibrated system.
• Static calibration result documented
  Record the outcome of the static calibration verification.

Dynamic Calibration Verification

• Dynamic calibration performed for required systems
  Select each ADAS system that required dynamic calibration and was verified.
• Dynamic calibration road test completed per OEM route or conditions
  Confirm the required drive cycle, speed range, lane markings, and road conditions were met.
• Driver alerts and system indicators behaved normally
  Confirm no abnormal warning lights, messages, or calibration alerts remained after the dynamic verification.
• Dynamic calibration result documented
  Record the outcome of the dynamic calibration verification.

Scan Tool Report and Closed RO

• Final scan tool report attached to closed RO
  Confirm the final scan tool report is attached to the closed repair order.
• Scan tool report reviewed for remaining faults
  Verify the report was reviewed for active DTCs, pending faults, or incomplete calibrations.
• Any remaining deficiencies documented
  Describe any unresolved non-conformance, warning messages, or follow-up actions required before release.

Final Release and Sign-Off

• Vehicle safe for release
  Confirm the vehicle is ready for release based on calibration verification and scan tool review.
• Inspector signature
  Inspector attests that the post-repair ADAS calibration verification is complete and documented.
• Customer or authorized representative notified
  Confirm the customer or authorized representative was informed of completed calibration work and any remaining limitations.