Run Post-Repair ADAS Calibration Verification Log — Free

Inspection Details

Repair order number recorded critical (required)

Enter the closed RO number associated with the repaired vehicle.

Vehicle identification recorded critical (required)

Record the vehicle year, make, model, and VIN or last 8 digits of VIN.

Inspection date and time recorded critical (required)

Document when the post-repair ADAS verification was completed.

Inspector name recorded critical (required)

Identify the technician, calibrator, or inspector completing the verification.

Repair type includes ADAS-related work

Select all repair categories that may affect ADAS operation.

Note (optional)

Pre-Verification Readiness

Manufacturer repair instructions reviewed critical (required)

Confirm calibration and verification steps were performed according to OEM procedures for the specific vehicle.

Yes No N/A

Required calibration environment met critical (required)

Verify the work area and conditions met the OEM requirements for static or dynamic calibration.

Yes No N/A

Pre-scan completed before calibration critical (required)

Confirm a diagnostic pre-scan was performed and any relevant DTCs were addressed before verification.

Yes No N/A

Post-repair scan tool report available critical (required)

Confirm the scan tool report is available for review and attachment to the closed RO.

Yes No N/A

Static Calibration Verification

Static calibration performed for required sensors critical (required)

Select each ADAS system that required static calibration and was verified.

Note (optional)

Static calibration targets and setup verified critical (required)

Confirm targets, distances, heights, alignment, and vehicle positioning matched OEM specifications.

Yes No N/A

Static calibration completed without unresolved DTCs critical (required)

Verify the calibration completed successfully and no unresolved diagnostic trouble codes remain related to the calibrated system.

Yes No N/A

Static calibration result documented critical (required)

Record the outcome of the static calibration verification.

Note (optional)

Dynamic Calibration Verification

Dynamic calibration performed for required systems critical (required)

Select each ADAS system that required dynamic calibration and was verified.

Note (optional)

Dynamic calibration road test completed per OEM route or conditions critical (required)

Confirm the required drive cycle, speed range, lane markings, and road conditions were met.

Yes No N/A

Driver alerts and system indicators behaved normally critical (required)

Confirm no abnormal warning lights, messages, or calibration alerts remained after the dynamic verification.

Yes No N/A

Dynamic calibration result documented critical (required)

Record the outcome of the dynamic calibration verification.

Note (optional)

Scan Tool Report and Closed RO

Final scan tool report attached to closed RO critical (required)

Confirm the final scan tool report is attached to the closed repair order.

Yes No N/A

Scan tool report reviewed for remaining faults critical (required)

Verify the report was reviewed for active DTCs, pending faults, or incomplete calibrations.

Yes No N/A

Any remaining deficiencies documented

Describe any unresolved non-conformance, warning messages, or follow-up actions required before release.

Final Release and Sign-Off

Vehicle safe for release critical (required)

Confirm the vehicle is ready for release based on calibration verification and scan tool review.

Yes No N/A

Inspector signature critical (required)

Inspector attests that the post-repair ADAS calibration verification is complete and documented.

Customer or authorized representative notified

Confirm the customer or authorized representative was informed of completed calibration work and any remaining limitations.

Yes No N/A

Note (optional)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Post-Repair ADAS Calibration Verification Log

Inspection Details

Pre-Verification Readiness

Static Calibration Verification

Dynamic Calibration Verification

Scan Tool Report and Closed RO

Final Release and Sign-Off

Get your results