Door Sweep and Threshold Seal Inspection

Inspection template for verifying door sweep, threshold, and corner pad sealing on entry door systems to confirm the weather seal at the sill and identify deficiencies that could allow drafts or water ingress.

Inspection Details

• Door identifier recorded
  Record the door number, location, or asset ID for the entry door being inspected.
• Inspection date and time recorded
  Capture the date and time of the inspection.
• Inspector name recorded
  Record the name of the person performing the inspection.

Door Sweep Condition

• Door sweep is present and securely attached
  Verify the sweep is installed, aligned, and not loose or detached.
• Door sweep makes continuous contact with sill or threshold
  Check for continuous contact across the full width of the door bottom without visible gaps.
• Door sweep shows no visible damage or excessive wear
  Inspect for cracking, curling, tearing, missing sections, or hardened material that could reduce sealing performance.

Threshold and Sill Seal

• Threshold is secure and properly fastened
  Verify the threshold is firmly anchored, level, and free from movement when tested.
• Seal at the sill is continuous with no visible daylight gaps
  Inspect the interface between the door bottom, threshold, and sill for visible gaps that could permit air or water infiltration.
• Threshold surface is free of debris, corrosion, or damage
  Check that the threshold is clean and not obstructed by debris, rust, deformation, or deterioration.

Corner Pads and Side Sealing

• Corner pads are present and properly seated
  Verify corner pads or corner seals are installed where applicable and are seated correctly against the door bottom assembly.
• Corner pads and adjacent seals show no gaps or separation
  Inspect the corners and adjacent sealing surfaces for separation, misalignment, or visible openings.
• Adjacent weatherstripping is intact and aligned
  Confirm nearby weatherstripping does not interfere with the sweep and remains intact at the door perimeter.