Templates › Inspections › SEO page

Run: Door Sweep and Threshold Seal Inspection

Inspect door sweeps, thresholds, and corner pad seals on entry doors to catch drafts, water ingress, and worn weather seals before they become maintenance or...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Details

Door identifier recorded

Record the door number, location, or asset ID for the entry door being inspected.

Inspection date and time recorded

Capture the date and time of the inspection.

Inspector name recorded

Record the name of the person performing the inspection.

Door Sweep Condition

Door sweep is present and securely attached critical (required)

Verify the sweep is installed, aligned, and not loose or detached.

Yes No N/A

Door sweep makes continuous contact with sill or threshold critical (required)

Check for continuous contact across the full width of the door bottom without visible gaps.

Yes No N/A

Door sweep shows no visible damage or excessive wear critical (required)

Inspect for cracking, curling, tearing, missing sections, or hardened material that could reduce sealing performance.

Yes No N/A

Threshold and Sill Seal

Threshold is secure and properly fastened critical (required)

Verify the threshold is firmly anchored, level, and free from movement when tested.

Yes No N/A

Seal at the sill is continuous with no visible daylight gaps critical (required)

Inspect the interface between the door bottom, threshold, and sill for visible gaps that could permit air or water infiltration.

Yes No N/A

Threshold surface is free of debris, corrosion, or damage

Check that the threshold is clean and not obstructed by debris, rust, deformation, or deterioration.

Yes No N/A

Corner Pads and Side Sealing

Corner pads are present and properly seated critical (required)

Verify corner pads or corner seals are installed where applicable and are seated correctly against the door bottom assembly.

Yes No N/A

Corner pads and adjacent seals show no gaps or separation critical (required)

Inspect the corners and adjacent sealing surfaces for separation, misalignment, or visible openings.

Yes No N/A

Adjacent weatherstripping is intact and aligned

Confirm nearby weatherstripping does not interfere with the sweep and remains intact at the door perimeter.

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free