Run Window Air Infiltration Field Test (ASTM E783) — Free

Inspection Details

Project name / number

Building / area / elevation tested

Test date and time critical (required)

Note (optional)

Inspector / testing agency critical (required)

Fenestration type and ID critical (required)

Referenced test standard and protocol critical (required)

Document the applicable standard(s), such as ASTM E783 and the project-specific AAMA 502 field verification protocol.

Specified air infiltration grade / acceptance criterion critical (required)

Pre-Test Conditions and Safety

Test area accessible and safe for setup critical (required)

Yes No N/A

Fenestration unit installed and fully complete critical (required)

Confirm the unit is installed, sealed, and in a condition suitable for field air leakage testing.

Yes No N/A

Adjacent finishes and temporary construction conditions documented

Yes No N/A

Interior and exterior surfaces prepared per test protocol critical (required)

Yes No N/A

Weather conditions suitable for testing critical (required)

Record whether wind, precipitation, and temperature conditions are within the limits established by the project protocol and test method.

Yes No N/A

Temporary seals, covers, or isolation measures installed as required critical (required)

Yes No N/A

Safety PPE used by testing personnel

Note (optional)

Test Setup and Equipment

Test apparatus identified and assembled correctly critical (required)

Yes No N/A

Pressure measurement device calibration current critical (required)

Verify calibration certificate is current for manometers, pressure gauges, flow meters, and related instrumentation.

Yes No N/A

Calibration certificate / instrument ID critical (required)

Test chamber / sealing method installed correctly critical (required)

Yes No N/A

Reference pressure differential target critical (required)

Enter the target pressure differential used for the test, typically per the project protocol.

Note (optional)

Measured pressure differential critical (required)

Note (optional)

Test equipment photo

Environmental Conditions

Outdoor air temperature

Note (optional)

Indoor air temperature

Note (optional)

Wind conditions documented critical (required)

Yes No N/A

Precipitation present during test critical (required)

If precipitation is present, document whether the test was paused, rescheduled, or otherwise affected.

Yes No N/A

Ambient pressure / barometric conditions

Environmental notes

Test Execution and Results

Test conducted per specified procedure critical (required)

Yes No N/A

Leakage rate at test pressure critical (required)

Record the measured air leakage rate normalized to the appropriate unit required by the project specification.

Note (optional)

Measured leakage within specified acceptance criterion critical (required)

Yes No N/A

Visible leakage locations observed

Note (optional)

Photographic evidence of leakage paths

Test observations and anomalies

Deficiencies, Corrective Actions, and Sign-Off

Deficiencies identified critical (required)

Yes No N/A

Corrective action assigned

Retest required

Yes No N/A

Inspector signature critical (required)

Owner / contractor acknowledgment

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Window Air Infiltration Field Test (ASTM E783)

Inspection Details

Pre-Test Conditions and Safety

Test Setup and Equipment

Environmental Conditions

Test Execution and Results

Deficiencies, Corrective Actions, and Sign-Off

Get your results