Run Water Plant Chemical Feed System Calibration Log — Free

Inspection Details

Inspection date and time recorded critical (required)

Inspector name and role documented critical (required)

Treatment area or pump station identified critical (required)

Chemical feed system or pump ID recorded critical (required)

Calibration Setup and Readiness

Relevant SOP or calibration procedure available at point of use critical (required)

Yes No N/A

Pump isolated and placed in safe condition for calibration critical (required)

Yes No N/A

Chemical supply level adequate for calibration run

Yes No N/A

Tubing, fittings, and valves visibly intact with no active leaks critical (required)

Yes No N/A

Calibration equipment available and within current calibration date critical (required)

Yes No N/A

Pump Calibration Verification

Chemical type verified critical (required)

Target feed rate setpoint critical (required)

Measured feed rate during calibration test critical (required)

Measured feed rate within acceptable tolerance critical (required)

Yes No N/A

Pump stroke, speed, or control setting verified against setpoint critical (required)

Yes No N/A

Calibration result documented as pass or fail critical (required)

Operational Condition and Safety

Pump runs smoothly without abnormal vibration or noise critical (required)

Yes No N/A

Injection point, backflow prevention, and check valves operating properly critical (required)

Yes No N/A

Secondary containment and spill control measures in place critical (required)

Yes No N/A

Required PPE used during calibration task critical (required)

Eyewash and emergency shower accessible and unobstructed critical (required)

Yes No N/A

Corrective Actions and Sign-Off

Deficiencies or non-conformances documented

Corrective action completed or assigned

Inspector signature captured critical (required)

Supervisor review required for failed calibration

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Water Plant Chemical Feed System Calibration Log

Inspection Details

Calibration Setup and Readiness

Pump Calibration Verification

Operational Condition and Safety

Corrective Actions and Sign-Off

Get your results