Run Warehouse Floor Scrubber Pre-Shift Inspection — Free

General Condition and Safety

Equipment is clean, intact, and free of visible damage critical (required)

Inspect the scrubber body, housing, wheels, and handles for cracks, missing parts, loose components, or other visible deficiencies.

Yes No N/A

No fluid leaks present under or around the machine critical (required)

Check for leaks from the solution tank, recovery tank, hoses, fittings, or battery area before startup.

Yes No N/A

Safety labels, warnings, and operating controls are legible and unobstructed

Verify that required labels and control markings can be read and are not damaged, missing, or covered.

Yes No N/A

Area around the machine is clear for safe startup critical (required)

Confirm the scrubber is positioned in a safe area with no obstructions, trip hazards, or unauthorized personnel nearby.

Yes No N/A

Battery and Power

Battery charge level is sufficient for the planned shift critical (required)

Verify the battery is adequately charged for the expected runtime before the scrubber is put into service.

Battery terminals and cables are secure and free of corrosion critical (required)

Inspect terminals, connectors, and cables for looseness, fraying, corrosion, or heat damage.

Yes No N/A

Battery compartment is closed and properly secured critical (required)

Confirm the battery compartment cover or access panel is latched and will not interfere with operation.

Yes No N/A

Brushes and Squeegee

Brushes or pads are installed correctly and show no excessive wear critical (required)

Inspect brushes or pads for wear, missing segments, damage, or improper installation.

Yes No N/A

Squeegee blade is intact, aligned, and free of tears or nicks critical (required)

Check the squeegee blade for wear, cuts, curling, or misalignment that could reduce water pickup.

Yes No N/A

Brush deck and squeegee assembly move freely without binding

Verify the brush deck and squeegee assembly raise, lower, and pivot as intended without unusual resistance.

Yes No N/A

Solution and Water Levels

Solution tank is filled to the required operating level critical (required)

Confirm the cleaning solution tank contains the correct amount of solution for the planned task and is not overfilled.

Recovery tank / waste water tank is empty or within allowable operating limit critical (required)

Verify the recovery tank is not overfilled and is ready for safe operation.

Cleaning solution is the correct type and concentration per SOP

Confirm the solution being used matches the site procedure and manufacturer guidance for the floor scrubber.

Yes No N/A

Operational Readiness

Power switch, controls, and indicators function normally critical (required)

Perform a brief functional check of startup controls, indicator lights, and basic operating functions before use.

Yes No N/A

Emergency stop or shutoff function is accessible and operational critical (required)

Verify the emergency stop or equivalent shutoff control is easy to reach and appears functional.

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Warehouse Floor Scrubber Pre-Shift Inspection

General Condition and Safety

Battery and Power

Brushes and Squeegee

Solution and Water Levels

Operational Readiness

Get your results