Run UPS Battery Health and Runtime Check — Free

Inspection Details

UPS asset ID / location recorded

Record the specific UPS unit identifier and physical location inspected.

Inspection date and time recorded critical (required)

Document when the inspection was performed.

Inspector name and signature captured critical (required)

Inspector attests the inspection was completed accurately.

UPS Online Status and Alarms

UPS is online and supplying load normally critical (required)

Verify the UPS indicates normal online operation and is supporting the connected load.

Yes No N/A

No active critical alarms or fault indicators present critical (required)

Confirm there are no active fault, bypass, battery, or inverter alarms requiring immediate response.

Yes No N/A

Input and output status indicators normal

Verify indicator lights, display status, and operating mode show normal conditions.

Yes No N/A

Bypass mode not engaged unless documented and approved critical (required)

Confirm the UPS is not in bypass mode unless there is a documented maintenance or operational exception.

Yes No N/A

Battery Health and Condition

Battery health status acceptable critical (required)

Record the battery health condition shown by the UPS monitoring interface or battery management system.

Battery cabinet and connections free of visible damage, corrosion, or leakage critical (required)

Inspect the battery enclosure, terminals, and visible cabling for physical defects or electrolyte leakage.

Yes No N/A

Photo evidence (optional)

Battery replacement or maintenance due date not exceeded

Verify the battery service interval, replacement date, or maintenance schedule is current.

Yes No N/A

Ambient temperature around UPS within manufacturer range

Record the ambient temperature near the UPS and compare it to the manufacturer-recommended operating range.

Runtime Verification

Measured battery runtime meets minimum required threshold critical (required)

Record the available runtime under current load and verify it meets the site minimum for critical operations.

Runtime test method documented

Identify how runtime was determined.

Connected load percentage recorded

Record the approximate load percentage at the time of inspection.

Note (optional)

Corrective Actions and Sign-Off

Deficiencies documented with corrective action

List any deficiencies, non-conformances, or follow-up actions required, including owner and target completion date.

Escalation to maintenance or AHJ required if critical item failed critical (required)

Confirm critical failures were escalated according to site procedure and maintenance workflow.

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: UPS Battery Health and Runtime Check

Inspection Details

UPS Online Status and Alarms

Battery Health and Condition

Runtime Verification

Corrective Actions and Sign-Off

Get your results