Run UL 982 / ETL Electrical Safety Pre-Shipment Audit - Food Prep Appliances — Free

Inspection Details

Product model / SKU recorded

Serial number or lot code recorded

Inspection date and time recorded critical (required)

Inspector name and signature captured critical (required)

Test Station Setup and Calibration

Dielectric test station calibration status current critical (required)

Verify the test station calibration is current and traceable before any electrical safety testing begins.

Yes No N/A

Ground bond / continuity tester calibration status current critical (required)

Yes No N/A

Test fixtures, leads, and probes free of visible damage critical (required)

Yes No N/A

Test setup matches approved work instruction or SOP critical (required)

Yes No N/A

Dielectric Withstand Verification

Dielectric test voltage applied per approved specification critical (required)

Record the actual applied test voltage used for the unit under test.

Note (optional)

Dielectric leakage current recorded critical (required)

Record the measured leakage current or equivalent dielectric result from the test station.

Note (optional)

No breakdown, flashover, or arcing observed during dielectric test critical (required)

Yes No N/A

Photo evidence (optional)

Grounding and Protective Bonding

Protective earth continuity / bond resistance recorded critical (required)

Record the measured continuity or bond resistance from accessible conductive parts to the grounding point.

Note (optional)

Grounding conductor securely terminated and undamaged critical (required)

Yes No N/A

Photo evidence (optional)

No exposed live parts or compromised insulation observed critical (required)

Yes No N/A

Photo evidence (optional)

Interlocks, Controls, and Functional Safety

Safety interlock prevents operation when guard or cover is open critical (required)

Yes No N/A

Start/stop controls function correctly and return to safe state critical (required)

Yes No N/A

Emergency stop, if equipped, is accessible and functional critical (required)

Yes No N/A

Cord, Plug, Enclosure, and Labeling

Power cord and plug are intact with no cuts, cracks, or loose prongs critical (required)

Yes No N/A

Photo evidence (optional)

Enclosure, guards, and fasteners are secure with no sharp edges or damage critical (required)

Yes No N/A

Photo evidence (optional)

Required safety labels and rating plate are present and legible critical (required)

Yes No N/A

Photo evidence (optional)

Warning and compliance markings match approved artwork

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: UL 982 / ETL Electrical Safety Pre-Shipment Audit - Food Prep Appliances

Inspection Details

Test Station Setup and Calibration

Dielectric Withstand Verification

Grounding and Protective Bonding

Interlocks, Controls, and Functional Safety

Cord, Plug, Enclosure, and Labeling

Get your results