Run Tire Mounting Bay Pre-Shift Equipment Inspection — Free

Inspection Setup and Operator Readiness

Inspector identifies bay, date, shift, and equipment ID

Record the tire mounting bay location, inspection date, shift, and tire changer or mounting equipment asset ID.

Operator is trained and authorized for tire changer use critical (required)

Verify the operator is trained, authorized, and familiar with the manufacturer's operating instructions and shop procedures.

Yes No N/A

Required PPE available and worn critical (required)

Confirm appropriate PPE is in use for the task, such as safety glasses, hearing protection if required, safety footwear, and gloves as specified by site procedure.

Yes No N/A

Pre-Use Visual Condition Check

Tire changer frame, mounts, and fasteners show no visible damage critical (required)

Inspect the machine frame, base, mounting points, and visible fasteners for cracks, deformation, looseness, or missing hardware.

Yes No N/A

Air lines, hydraulic lines, and electrical cords are intact and routed safely critical (required)

Check for cuts, abrasion, leaks, exposed conductors, damaged fittings, or trip hazards. Verify cords and hoses are not pinched or routed through traffic paths.

Yes No N/A

Guards, shields, and safety covers are in place critical (required)

Confirm all manufacturer-required guards, shields, and covers are installed and secure before operation.

Yes No N/A

Lubrication, leaks, and contamination around the machine are acceptable critical (required)

Look for oil, air, hydraulic, or grease leaks; excessive debris; and contamination that could affect safe operation or create slip hazards.

Yes No N/A

Operational Controls and Safety Devices

Emergency stop and power disconnect function correctly critical (required)

Verify the emergency stop is accessible and the machine can be de-energized using the normal disconnect or shutoff control.

Yes No N/A

Pedals, clamps, bead breaker, and rotation controls operate smoothly critical (required)

Test controls for normal response, sticking, delayed movement, unusual noise, or uncontrolled motion. Do not use the machine if controls are erratic.

Yes No N/A

Air pressure is within the manufacturer-specified operating range critical (required)

Record the measured supply pressure and confirm it is within the equipment manufacturer's specified range.

Safety interlocks and restraint features are functional critical (required)

Verify any machine interlocks, wheel restraint features, or bead seating safety devices operate as intended per the manufacturer's instructions.

Yes No N/A

Work Area, Housekeeping, and Fire Safety

Floor around the bay is clean, dry, and free of slip/trip hazards critical (required)

Inspect the immediate work area for spills, loose tools, cords, debris, and other obstructions that could affect safe movement around the tire changer.

Yes No N/A

Compressed air hoses, tools, and accessories are stored safely

Verify hoses, hand tools, valve tools, bead lubricant, and accessories are organized and do not create pinch, strike, or trip hazards.

Yes No N/A

Fire extinguisher is present, accessible, and inspection current critical (required)

Confirm a suitable extinguisher is mounted, unobstructed, and within its inspection interval per site fire safety procedure and applicable NFPA requirements.

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Tire Mounting Bay Pre-Shift Equipment Inspection

Inspection Setup and Operator Readiness

Pre-Use Visual Condition Check

Operational Controls and Safety Devices

Work Area, Housekeeping, and Fire Safety

Get your results