Templates › Inspections › SEO page

Run: Taylor Shake Machine Heat-Treat Cycle Completion Verification

Verify Taylor shake machine heat-treat cycles with a clear record of temperature holds, cooling performance, timestamps, and error codes. Use it to document ...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Equipment and Cycle Identification

Machine identified as Taylor shake machine / shake freezer critical (required)

Confirm the inspected unit matches the intended Taylor shake machine and is the correct equipment for the recorded cycle.

Yes No N/A

Cycle ID or batch identifier recorded critical (required)

Enter the unique cycle identifier, batch number, or production reference used to trace the heat-treat event.

Operator or inspector name recorded critical (required)

Record the person verifying the cycle completion.

Inspection date and time recorded critical (required)

Capture the date and time the verification was completed.

Heat-Treat Hold Verification

Mix temperature held above 151°F for at least 35 minutes critical (required)

Record the verified hold time above 151°F. The cycle must meet or exceed 35 minutes.

Peak or maintained mix temperature recorded critical (required)

Record the relevant temperature reading from the cycle log or display.

Heat-treat phase start time recorded critical (required)

Record when the heat-treat hold began.

Heat-treat phase completion time recorded critical (required)

Record when the heat-treat hold ended.

Cooling Verification

Mix cooled below 41°F within 90 minutes critical (required)

Record the elapsed time from heat-treat completion to reaching below 41°F.

Final mix temperature below 41°F critical (required)

Record the final stabilized mix temperature after cooling.

Cooling start time recorded critical (required)

Record when the cooling phase began.

Cooling completion time recorded critical (required)

Record when the mix reached the required cooling endpoint.

Error Codes, Deficiencies, and Sign-Off

Machine error codes reviewed and recorded

Enter any error codes shown during the cycle, or note 'none'.

Any cycle interruption or alarm occurred critical (required)

Indicate whether the cycle was interrupted, alarmed, or aborted at any point.

Yes No N/A

Corrective action documented for any failure or deficiency

Describe corrective action taken or required if any item failed.

Inspector signature critical (required)

Signature confirming the verification is complete and accurate.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free