Run Structural Steel Erection Inspection — Free

Inspection Details and Scope

Inspection date and time recorded

Project area / gridline / elevation identified

Inspector identified as competent person or designated inspector critical (required)

Inspection scope includes current erection stage and affected bays

Weather and site conditions documented if affecting stability

Member Placement and Alignment

Columns, beams, and girders installed in correct designated location critical (required)

Yes No N/A

Photo evidence (optional)

Member orientation matches approved erection drawings critical (required)

Yes No N/A

Plumbness of erected members within project tolerance critical (required)

Line and level of beams/girders verified against layout control

Yes No N/A

Required bearing and seat conditions are present critical (required)

Yes No N/A

Temporary Bracing and Stability

Temporary bracing installed where required by erection sequence critical (required)

Yes No N/A

Photo evidence (optional)

Bracing members are properly connected and secured critical (required)

Yes No N/A

No unbraced unstable frames or unsupported members observed critical (required)

Yes No N/A

Photo evidence (optional)

Temporary guy lines, shores, or supports are tensioned and anchored

Yes No N/A

Bracing remains in place until permanent stability is achieved critical (required)

Yes No N/A

Connections, Fasteners, and Weld Readiness

Bolted connections installed in accordance with erection sequence critical (required)

Yes No N/A

Photo evidence (optional)

Required bolts, washers, and nuts are present at each connection critical (required)

Yes No N/A

Connections are snug-tight or fully tightened per project requirement critical (required)

Field weld locations are identified and ready for qualified welding work

Yes No N/A

Connection deficiencies or missing hardware documented

Yes No N/A

Note (optional)

Safety Controls and Closeout

Fall protection in place for exposed erection work critical (required)

Yes No N/A

Photo evidence (optional)

Access routes, exclusion zones, and drop zones are established critical (required)

Yes No N/A

Any observed deficiency or non-conformance assigned corrective action

Inspection status

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Structural Steel Erection Inspection

Inspection Details and Scope

Member Placement and Alignment

Temporary Bracing and Stability

Connections, Fasteners, and Weld Readiness

Safety Controls and Closeout

Get your results