Templates › Inspections › SEO page

Run: Structural and Frame Measurement Report

Use this Structural and Frame Measurement Report to document pre- and post-repair dimensions against OEM specs at the center section and four corners of a co...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Details

Repair order number recorded critical (required)

Vehicle year, make, model, and VIN recorded critical (required)

Structural technician name and certification level recorded critical (required)

Inspection date and time recorded critical (required)

OEM repair data source identified critical (required)

Record the OEM repair manual, dimension chart, or electronic measuring system used as the reference document.

Pre-Repair Measurement Verification

Center section measurements captured and compared to OEM dimensions critical (required)

Enter the measured deviation from OEM specification for the center section.

Photo evidence (optional)

Note (optional)

Front left corner measurements captured and compared to OEM dimensions critical (required)

Enter the measured deviation from OEM specification for the front left corner.

Photo evidence (optional)

Note (optional)

Front right corner measurements captured and compared to OEM dimensions critical (required)

Enter the measured deviation from OEM specification for the front right corner.

Photo evidence (optional)

Note (optional)

Rear left corner measurements captured and compared to OEM dimensions critical (required)

Enter the measured deviation from OEM specification for the rear left corner.

Photo evidence (optional)

Note (optional)

Rear right corner measurements captured and compared to OEM dimensions critical (required)

Enter the measured deviation from OEM specification for the rear right corner.

Photo evidence (optional)

Note (optional)

Structural Setup and Measurement Method

Vehicle secured on approved frame bench or measuring system critical (required)

Yes No N/A

Measuring system calibrated and zeroed before use critical (required)

Yes No N/A

Reference points match OEM measurement locations critical (required)

Yes No N/A

Measurement method documented

Note (optional)

Post-Repair Measurement Verification

Center section post-repair measurement within OEM tolerance critical (required)

Enter the final deviation from OEM specification for the center section.

Photo evidence (optional)

Note (optional)

Front left corner post-repair measurement within OEM tolerance critical (required)

Enter the final deviation from OEM specification for the front left corner.

Photo evidence (optional)

Note (optional)

Front right corner post-repair measurement within OEM tolerance critical (required)

Enter the final deviation from OEM specification for the front right corner.

Photo evidence (optional)

Note (optional)

Rear left corner post-repair measurement within OEM tolerance critical (required)

Enter the final deviation from OEM specification for the rear left corner.

Photo evidence (optional)

Note (optional)

Rear right corner post-repair measurement within OEM tolerance critical (required)

Enter the final deviation from OEM specification for the rear right corner.

Photo evidence (optional)

Note (optional)

Final Quality Verification and Sign-Off

All measured points are within OEM tolerance critical (required)

Yes No N/A

No visible structural distortion, kinks, or abnormal gaps remain critical (required)

Yes No N/A

Corrective actions documented for any remaining non-conformance

Technician signature critical (required)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free