Run Splice and Termination Verification Log — Free

Inspection Identification

Inspection date and time recorded critical (required)

Work location, panel, vault, or equipment identified critical (required)

Circuit, feeder, or cable ID documented critical (required)

Voltage class identified critical (required)

Inspector name and company recorded critical (required)

Reference drawing, work order, or permit number

Splice and Termination Materials

Kit type matches approved application and voltage class critical (required)

Kit part number and lot or batch number recorded

Conductor size and insulation type match kit rating critical (required)

Lugs, connectors, and compression components are correct for the conductor critical (required)

Yes No N/A

Consumables, sealants, and stress-control materials are present and within shelf life

Yes No N/A

Torque and Connection Verification

Specified torque value documented for each bolted connection critical (required)

Measured torque value documented for each bolted connection critical (required)

Measured torque meets specified torque within tolerance critical (required)

Yes No N/A

All connector set screws, lugs, and hardware are fully seated and secured critical (required)

Yes No N/A

Anti-oxidant compound, if required, was applied per manufacturer instructions

Yes No N/A

Workmanship and Installation Condition

Cable jacket, insulation, and shielding are intact with no visible damage critical (required)

Yes No N/A

Splice or termination is properly aligned, supported, and strain relieved critical (required)

Yes No N/A

Insulation clearance, creepage, and spacing appear compliant with kit instructions critical (required)

Yes No N/A

Environmental conditions were suitable during installation

Foreign material, moisture, contamination, or debris present at connection area critical (required)

Yes No N/A

Testing, Sign-Off, and Corrective Action

Insulation resistance or continuity test results documented, if required by scope

Deficiencies or non-conformances recorded with corrective action critical (required)

Inspector sign-off completed critical (required)

Work released for service critical (required)

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Splice and Termination Verification Log

Inspection Identification

Splice and Termination Materials

Torque and Connection Verification

Workmanship and Installation Condition

Testing, Sign-Off, and Corrective Action

Get your results