Run Sanding Dust Extraction and Downdraft Table Inspection — Free

Inspection Setup and Area Identification

Inspection date and time recorded

Downdraft table or dust extraction unit identified by asset ID or location

Area is accessible and free of active work that would prevent a safe inspection critical (required)

Yes No N/A

Inspector has reviewed the applicable SOP or maintenance checklist

Yes No N/A

Dust Extraction System Condition

Dust collector housing, ducting, and connections are intact with no visible damage or loose fittings critical (required)

Yes No N/A

No visible dust leakage at seams, access doors, or hose connections critical (required)

Yes No N/A

Collection bin, drawer, or disposal container is properly seated and not overfilled critical (required)

Yes No N/A

System indicators show normal operation with no alarm, fault, or overload condition critical (required)

Yes No N/A

Access panels and service doors are closed and secured

Yes No N/A

Downdraft Table Airflow and Capture Performance

Airflow at the downdraft table is present and uniform across the work surface critical (required)

Yes No N/A

Measured face velocity or table airflow is within the manufacturer's acceptable range

Note (optional)

Dust is being captured at the source during a brief test sanding or airflow check critical (required)

Yes No N/A

Work surface openings, grates, and plenums are not blocked by tools, parts, or debris

Yes No N/A

No unusual vibration, noise, or airflow pulsation is observed during operation

Yes No N/A

Filters and Maintenance Condition

Primary filters are installed correctly and seated without bypass gaps critical (required)

Yes No N/A

Filters show no visible excessive loading, tearing, collapse, or moisture damage critical (required)

Yes No N/A

Differential pressure or filter restriction reading is within the acceptable operating range

Note (optional)

Filter change or cleaning is current per maintenance schedule

Yes No N/A

Housekeeping, Fire Risk, and Corrective Actions

Accumulated sanding dust is removed from the table, floor, and nearby surfaces critical (required)

Yes No N/A

No ignition sources, hot work, or open flames are present in the dust collection area critical (required)

Yes No N/A

Any deficiency, non-conformance, or repair need is documented with an owner and due date

Inspector signature

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Sanding Dust Extraction and Downdraft Table Inspection

Inspection Setup and Area Identification

Dust Extraction System Condition

Downdraft Table Airflow and Capture Performance

Filters and Maintenance Condition

Housekeeping, Fire Risk, and Corrective Actions

Get your results