Run Rooftop Fall Protection Anchor Annual Inspection — Free

Inspection Details

Inspection date and time recorded critical (required)

Inspector identified as qualified person critical (required)

Record the inspector name, title, and qualification basis.

Anchor system ID / asset tag recorded critical (required)

Roof location documented critical (required)

Include building, roof area, gridline, elevation, or other location detail sufficient to uniquely identify the anchor.

Anchor Identification and Installation

Anchor type matches approved design critical (required)

Anchor and mounting hardware are securely installed critical (required)

Verify no looseness, movement, missing components, or visible separation at the mounting interface.

Yes No N/A

Photo evidence (optional)

Fasteners present and intact critical (required)

Check for missing, damaged, stripped, or substituted fasteners; verify locking devices or torque retention features where applicable.

Yes No N/A

Roof substrate and structural attachment show no visible distress critical (required)

Inspect for cracking, deformation, water intrusion, rot, corrosion, or other signs that the substrate or structural member may have been compromised.

Yes No N/A

Photo evidence (optional)

Condition and Serviceability

Anchor shows no deformation, cracks, or weld damage critical (required)

Inspect all visible anchor components for bending, elongation, cracking, broken welds, or other structural damage.

Yes No N/A

Photo evidence (optional)

Corrosion or deterioration within acceptable limits critical (required)

Check for rust, pitting, coating failure, UV degradation, or other deterioration that could affect performance.

Yes No N/A

Anchor label or identification markings legible

Verify manufacturer identification, capacity rating, installation date, and inspection label are present and readable.

Yes No N/A

Anchor is free of obstructions and accessible for use critical (required)

Confirm the anchor can be reached and used without removing permanent barriers, debris, or stored materials.

Yes No N/A

No evidence of unauthorized modification or repair critical (required)

Look for field welding, drilling, cut components, non-approved replacement parts, or other non-conforming alterations.

Yes No N/A

Load Test, Recertification, and Compliance

Annual inspection completed by qualified person critical (required)

Yes No N/A

Load test or recertification performed when required critical (required)

Document whether a load test, recertification, or visual-only inspection was performed based on the anchor manufacturer's instructions, site program, and any reroofing or renovation work.

Note (optional)

Inspection result meets OSHA / ANSI Z359 requirements critical (required)

Confirm the anchor remains suitable for continued service based on the inspection findings and applicable manufacturer and site requirements.

Yes No N/A

Date of last reroofing or roof renovation recorded

If reroofing or renovation occurred, record the date to support recertification tracking.

Deficiencies and Corrective Actions

Deficiencies documented with corrective action critical (required)

Record all deficiencies, non-conformances, and required corrective actions, including removal from service if applicable.

Anchor removed from service if unsafe critical (required)

Use this item when the anchor is unsafe, damaged, or non-compliant and must be tagged out until repaired or replaced.

Yes No N/A

Inspector Sign-Off

Inspector signature critical (required)

Supervisor or AHJ review completed

Optional review by supervisor, safety manager, or Authority Having Jurisdiction if required by site policy.

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Rooftop Fall Protection Anchor Annual Inspection

Inspection Details

Anchor Identification and Installation

Condition and Serviceability

Load Test, Recertification, and Compliance

Deficiencies and Corrective Actions

Inspector Sign-Off

Get your results