Run Roofing Panel Seam and Profile Inspection — Free

Inspection Setup and Panel Identification

Panel type, profile, and gauge match the job traveler or shop order critical (required)

Yes No N/A

Panel length, color/finish, and quantity are identified and traceable

Yes No N/A

Inspection tools available and suitable for dimensional verification

Yes No N/A

Reference profile or approved sample available at inspection station

Yes No N/A

Rib Profile and Form Accuracy

Rib profile matches approved profile geometry critical (required)

Yes No N/A

Photo evidence (optional)

Rib height and shape are consistent along the full panel length

Yes No N/A

Photo evidence (optional)

Rib spacing is uniform and free from waviness or distortion

Yes No N/A

Panel is straight with no visible twist, bow, or oil-canning beyond acceptable limits

Yes No N/A

Coverage Width and Dimensional Verification

Overall coverage width measured within approved tolerance critical (required)

Male and female seam legs are formed to the correct width and depth critical (required)

Yes No N/A

Photo evidence (optional)

Panel coverage is consistent from end to end

Yes No N/A

Cut length, end condition, and squareness support proper field lap and seam engagement

Yes No N/A

Seam Quality and Field-Fit Readiness

Seam closes fully and evenly without gaps, splits, or open hems critical (required)

Yes No N/A

Photo evidence (optional)

Seam alignment is straight and consistent for field lapping and seaming critical (required)

Yes No N/A

Photo evidence (optional)

Seam edges are free from burrs, sharp deformation, cracks, or coating damage

Yes No N/A

Photo evidence (optional)

Panel end laps, if present, are formed to allow proper overlap and water-shedding performance

Yes No N/A

Surface Condition, Handling Damage, and Sign-Off

Surface finish is free from dents, scratches, scuffs, and roll-forming marks that exceed acceptance criteria

Yes No N/A

Photo evidence (optional)

Panels are stacked, tagged, and protected to prevent transit or handling damage

Yes No N/A

Non-conformances documented and dispositioned critical (required)

Yes No N/A

Inspector signature

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Roofing Panel Seam and Profile Inspection

Inspection Setup and Panel Identification

Rib Profile and Form Accuracy

Coverage Width and Dimensional Verification

Seam Quality and Field-Fit Readiness

Surface Condition, Handling Damage, and Sign-Off

Get your results