Run Residential Framing Pre-Drywall Walk-Through — Free

Inspection Setup and Project Verification

Project address, lot/unit, and inspection date verified

Approved plan set and latest revision available on site critical (required)

Yes No N/A

Inspection scope confirmed as pre-drywall trade-by-trade walk critical (required)

Yes No N/A

Areas not ready for inspection identified and documented

Note (optional)

Structural Framing

Studs, joists, rafters, and beams installed per plan layout critical (required)

Yes No N/A

Framing members are plumb, level, and aligned without visible bowing or twist beyond acceptable tolerance

Yes No N/A

Required headers, lintels, and load-bearing supports installed at openings critical (required)

Yes No N/A

Fasteners, straps, anchors, and connectors installed where specified critical (required)

Yes No N/A

Any damaged, split, notched, or altered framing members documented

Note (optional)

Openings, stair framing, and guard/handrail backing locations verified

Yes No N/A

Mechanical, Electrical, and Plumbing Rough-Ins

Plumbing rough-ins are properly routed, supported, and protected from framing damage critical (required)

Yes No N/A

HVAC ductwork, vents, and equipment rough-ins are installed without obvious conflicts

Yes No N/A

Electrical rough-in boxes, cables, and conduit are secured and positioned correctly critical (required)

Yes No N/A

Cable and piping penetrations are sealed or prepared for required fireblocking/firestopping critical (required)

Yes No N/A

Rough-in conflicts between trades identified and logged for correction

Note (optional)

Visible rough-in deficiencies documented with photos

Note (optional)

Blocking, Backing, and Nail Plates

Blocking installed for cabinets, vanities, grab bars, handrails, TVs, and other specified fixtures critical (required)

Yes No N/A

Fireblocking installed at concealed spaces, chases, and required transitions critical (required)

Yes No N/A

Nail plates installed where wiring or piping is within required protection distance of framing faces critical (required)

Yes No N/A

Backing locations for accessories and finish items are marked or photographed for reference

Note (optional)

Missing or incorrect blocking items identified for correction

Note (optional)

Openings, Penetrations, and Safety Readiness

Window and door openings are framed correctly and free of obvious damage

Yes No N/A

Penetrations through rated assemblies or concealed spaces are identified for required protection critical (required)

Yes No N/A

Work area is free of protruding nails, loose debris, and trip hazards

Yes No N/A

Temporary bracing, access, and fall hazard controls are in place where needed critical (required)

Yes No N/A

Items requiring follow-up before insulation are listed

Corrective Actions and Final Sign-Off

Deficiencies and non-conformances recorded with responsible trade assigned critical (required)

Re-inspection required before insulation installation critical (required)

Yes No N/A

Inspector final recommendation critical (required)

Note (optional)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Residential Framing Pre-Drywall Walk-Through

Inspection Setup and Project Verification

Structural Framing

Mechanical, Electrical, and Plumbing Rough-Ins

Blocking, Backing, and Nail Plates

Openings, Penetrations, and Safety Readiness

Corrective Actions and Final Sign-Off

Get your results