Run Press Brake Setup Sheet and First-Bend Verification — Free

Job and Setup Sheet Identification

Job number, part number, and revision match the setup sheet critical (required)

Yes No N/A

Material type, thickness, and grain direction match the setup sheet critical (required)

Yes No N/A

Required bend sequence and bend direction are understood and available

Yes No N/A

Setup sheet, drawing, and bend allowance information are at the machine

Yes No N/A

Tooling and Machine Setup Verification

Punch selection matches the setup sheet critical (required)

Yes No N/A

Die selection matches the setup sheet critical (required)

Yes No N/A

Punch and die are properly seated, aligned, and secured critical (required)

Yes No N/A

Backgauge position matches the setup sheet critical (required)

Ram depth / bend program setting matches the setup sheet

Yes No N/A

Tooling clearance is adequate for part geometry and bend sequence critical (required)

Yes No N/A

Trial Bend and First-Bend Verification

Trial bend completed using the correct material orientation and bend sequence critical (required)

Yes No N/A

First-bend angle measured critical (required)

Target bend angle from setup sheet

Springback compensation is acceptable for the measured material and tooling critical (required)

Yes No N/A

First-bend flange or leg dimensions meet drawing requirements critical (required)

Yes No N/A

Part orientation after bend matches the setup sheet and drawing

Yes No N/A

Approval, Non-Conformance, and Release

Any setup deviation or non-conformance documented

Yes No N/A

Note (optional)

Corrective action completed and rechecked after any adjustment critical (required)

Yes No N/A

First-bend sample approved for production release critical (required)

Yes No N/A

Inspector or setup technician signature critical (required)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Press Brake Setup Sheet and First-Bend Verification

Job and Setup Sheet Identification

Tooling and Machine Setup Verification

Trial Bend and First-Bend Verification

Approval, Non-Conformance, and Release

Get your results