Run Pre-Disassembly Seam Sealer Photo Record — Free

Inspection Details

Vehicle and repair order identified

Record the RO number, year/make/model, VIN last 8, and repair area being documented.

Inspection date and technician recorded critical (required)

Capture the date/time the pre-disassembly seam sealer record was completed.

Inspection performed before disassembly critical (required)

Confirm photos were taken before any teardown, cleaning, or seam disturbance occurred.

Yes No N/A

Repair area and seam locations identified

Select all areas documented in this record.

Note (optional)

Factory Seam Sealer Photo Capture

Wide-angle overview photo captured for each seam area critical (required)

Provide context showing the seam location on the vehicle before close-up detail shots.

Close-up photos captured of seam bead profile critical (required)

Capture bead width, height, edge definition, and continuity at each documented seam.

Texture and tooling pattern clearly visible critical (required)

Confirm the photo shows the factory texture, brush marks, stipple, or tooling pattern clearly enough for replication.

Yes No N/A

Photo evidence (optional)

Termination points and seam ends documented critical (required)

Confirm the start and stop points of the seam sealer are visible in the record.

Yes No N/A

Photo evidence (optional)

Overlaps, joints, and transitions documented

Confirm photos show where seam sealer overlaps panels, transitions across joints, or changes direction.

Yes No N/A

Photo evidence (optional)

Lighting and focus adequate for audit review critical (required)

Photos are sharp, well-lit, and free of glare or blur so the seam pattern can be reviewed later.

Yes No N/A

Photo labels or annotations added

Confirm each image is labeled with location, side of vehicle, and seam identifier where applicable.

Yes No N/A

Seam Sealer Condition and Replication Notes

Factory seam sealer appears original critical (required)

Indicate whether the seam sealer appears to be OEM/original versus previously repaired or overcoated.

Yes No N/A

Evidence of prior repair or rework noted

Document any signs of non-factory seam sealer, sanding, over-spray, cracking, or reapplication.

Yes No N/A

Bead size and texture described

Record the observed bead profile, texture style, and any notable application characteristics needed for replication.

Replication method or product reference noted

Document the planned refinish approach, matching method, or SOP/OEM reference used to duplicate the appearance.

Reference document attached

Enter the SOP, OEM procedure, or internal reference used for seam sealer matching. Example: 3M seam sealer/coating SOP or OEM repair procedure.

Record Quality and Sign-Off

All required seam areas documented critical (required)

Confirm every seam area relevant to the repair plan was photographed and recorded.

Yes No N/A

Photos are sufficient for OEM audit review critical (required)

Rate whether the record is complete enough to support OEM appearance matching and audit review.

Corrective action required for missing or unclear images

Indicate whether retakes, additional close-ups, or supplemental notes are needed before teardown proceeds.

Yes No N/A

Inspector signature critical (required)

Inspector attestation that the pre-disassembly seam sealer record is complete and accurate.

Supervisor or estimator review completed

Confirm the record was reviewed by the appropriate lead, estimator, or quality reviewer.

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Pre-Disassembly Seam Sealer Photo Record

Inspection Details

Factory Seam Sealer Photo Capture

Seam Sealer Condition and Replication Notes

Record Quality and Sign-Off

Get your results