Run Light Gauge Steel Framing Inspection — Free

Project and Inspection Details

Project name and location recorded

Inspection date and time recorded

Inspector name and company recorded

Area, floor, gridline, or room identified

Approved drawings, shop drawings, and submittals available on site critical (required)

Yes No N/A

Applicable inspection criteria confirmed

Note (optional)

Materials and Member Verification

Studs, tracks, and accessories match approved member sizes and gauges critical (required)

Yes No N/A

Track gauge measured within approved specification critical (required)

Enter the installed track gauge or thickness as specified on the approved documents.

Members are free of visible damage, excessive corrosion, or deformation

Yes No N/A

Cut edges, notches, and punch-outs are acceptable and do not compromise member integrity critical (required)

Yes No N/A

Fasteners and connectors match approved type and corrosion protection critical (required)

Yes No N/A

Layout, Alignment, and Plumb

Layout matches approved dimensions and opening locations critical (required)

Yes No N/A

Stud spacing measured and compliant with approved design critical (required)

Record the on-center spacing used for the inspected framing run.

Walls, partitions, or framing lines are plumb, level, and straight within tolerance critical (required)

Yes No N/A

Openings, headers, and jambs are framed per approved details critical (required)

Yes No N/A

Fasteners and Screw Spacing

Fastener type and length match approved specification critical (required)

Yes No N/A

Screw spacing at track-to-stud connections complies with approved detail critical (required)

Enter the measured screw spacing for the connection being inspected.

Required number of fasteners at each connection point is installed critical (required)

Yes No N/A

Fasteners are properly seated without stripping, overdriving, or missed members critical (required)

Yes No N/A

Bridging, Bracing, and Stability

Bridging is installed at required locations and intervals critical (required)

Yes No N/A

Bridging members are properly attached and continuous where required critical (required)

Yes No N/A

Temporary bracing remains in place until framing is stable critical (required)

Yes No N/A

No visible instability, excessive deflection, or unsecured framing members observed critical (required)

Yes No N/A

Final Condition and Sign-Off

Deficiencies documented with location and corrective action

Follow-up inspection required

Yes No N/A

Inspection result

Inspector signature critical (required)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Light Gauge Steel Framing Inspection

Project and Inspection Details

Materials and Member Verification

Layout, Alignment, and Plumb

Fasteners and Screw Spacing

Bridging, Bracing, and Stability

Final Condition and Sign-Off

Get your results