Templates › Inspections › SEO page

Run: Laminate Bond Strength Test Record

Record peel bond strength results for laminated film samples and confirm they meet the specified acceptance criteria before release. Use it to catch weak lam...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Identification

Production lot or work order identified critical (required)

Record the lot number, work order, or batch identifier for the laminated film sample.

Sample date and time recorded critical (required)

Capture when the sample was pulled from production.

Sample source identified critical (required)

Select where the sample originated.

Sample identification label present and legible critical (required)

Verify the sample label matches the production record and is readable.

Yes No N/A

Specification or acceptance criteria referenced critical (required)

Enter the minimum acceptable peel strength and any special acceptance criteria.

Test method referenced critical (required)

Document the method used for the peel bond strength test.

Sample Condition and Preparation

Sample condition acceptable before test critical (required)

Confirm the sample is intact, not visibly damaged, and suitable for testing.

Yes No N/A

Conditioning environment recorded

Record conditioning temperature, humidity, and duration if required by the method.

Specimen dimensions recorded critical (required)

Enter specimen width or other required dimensions used for the peel test.

Note (optional)

Number of test replicates prepared critical (required)

Record the number of peel test replicates prepared for the sample.

Specimen edges and bond area prepared per method critical (required)

Verify the specimen was cut, separated, and prepared according to the approved method.

Yes No N/A

Test Setup and Apparatus

Test machine or force gauge identified critical (required)

Record the instrument ID used for the peel test.

Instrument calibration current critical (required)

Confirm the test instrument calibration is current and traceable.

Yes No N/A

Crosshead speed or pull rate recorded critical (required)

Enter the pull rate used for the peel test.

Note (optional)

Grip or fixture setup matches method critical (required)

Verify the grips, fixtures, and alignment match the approved test method.

Yes No N/A

Test environment recorded

Record ambient temperature and humidity during testing if required.

Peel Strength Results

Replicate 1 peel strength critical (required)

Enter the measured peel strength for the first replicate.

Note (optional)

Replicate 2 peel strength critical (required)

Enter the measured peel strength for the second replicate.

Note (optional)

Replicate 3 peel strength critical (required)

Enter the measured peel strength for the third replicate.

Note (optional)

Average peel strength critical (required)

Record the calculated average peel strength across all replicates.

Note (optional)

Failure mode observed

Select the dominant failure mode observed during peel testing.

Compliance Review and Disposition

Results meet specification critical (required)

Confirm the measured peel strength meets the minimum acceptance criteria.

Yes No N/A

Delamination risk acceptable for converting and end use critical (required)

Assess whether the laminate is suitable for downstream converting and intended end use.

Yes No N/A

Non-conformance documented if out of spec

If any result is below spec, confirm a non-conformance or deviation record was opened.

Yes No N/A

Inspector signature critical (required)

Inspector or lab technician sign-off.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free