Run Free Alternator and Starter Bench Test Service Audit — Free

Audit Setup and Service Identification

Store location and audit date recorded

Component tested identified as alternator or starter

Note (optional)

Technician or associate name recorded

Customer item tag or intake identifier present

Bench-Test Station Condition and Setup

Bench-test station is clean, organized, and free of loose tools or debris critical (required)

Yes No N/A

Manufacturer test procedure is available at the station and being followed critical (required)

Yes No N/A

Correct adapters, leads, and clamps are used for the component being tested critical (required)

Yes No N/A

Test bench power cords, leads, and connectors are intact with no exposed conductors critical (required)

Yes No N/A

Station has adequate lighting and clear access for safe operation

Yes No N/A

Note (optional)

Safe Work Practices and Electrical Handling

Appropriate PPE is worn for the task critical (required)

Verify task-appropriate PPE such as safety glasses and gloves when handling heavy or sharp components.

Yes No N/A

Component is secured before energizing the test bench critical (required)

Yes No N/A

Hands and body are kept clear of rotating or energized parts during the test critical (required)

Yes No N/A

No bypassing of guards, interlocks, or safety controls was observed critical (required)

Yes No N/A

Damaged, leaking, or visibly unsafe components are not tested without escalation critical (required)

Yes No N/A

Manufacturer Procedure Compliance

Correct test sequence was followed for the component type critical (required)

Yes No N/A

Input settings or selector positions match the manufacturer procedure critical (required)

Yes No N/A

Test duration and number of cycles match the required procedure critical (required)

Confirm the component was not under-tested or over-tested relative to the procedure.

Yes No N/A

Pass/fail criteria were applied consistently and objectively critical (required)

Yes No N/A

Any deviations from the manufacturer procedure were documented and justified

Yes No N/A

Note (optional)

Customer Communication and Service Closeout

Test result was communicated clearly as pass, fail, or inconclusive critical (required)

Yes No N/A

Customer was informed of any observed defects or limitations

Yes No N/A

Note (optional)

Recommended next steps were provided when the component failed

Yes No N/A

Note (optional)

Service was completed without charge and no unauthorized repair work was performed critical (required)

Yes No N/A

Documentation, Housekeeping, and Corrective Actions

Inspection notes include the component type, result, and any observed deficiencies

Yes No N/A

Note (optional)

Photo evidence captured for any failed or non-conforming condition

Corrective actions or escalation items were documented for critical deficiencies

Yes No N/A

Note (optional)

Work area was left clean and free of parts, packaging, and test debris

Yes No N/A

Note (optional)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Free Alternator and Starter Bench Test Service Audit

Audit Setup and Service Identification

Bench-Test Station Condition and Setup

Safe Work Practices and Electrical Handling

Manufacturer Procedure Compliance

Customer Communication and Service Closeout

Documentation, Housekeeping, and Corrective Actions

Get your results