Run Forklift Daily Pre-Shift Construction Inspection — Free

Inspection Details

Forklift ID / asset number

Enter the forklift asset tag, unit number, or fleet identifier.

Date and time of inspection

Record when the pre-shift inspection was completed.

Inspector name and signature

Inspector must sign to confirm the inspection was completed before operation.

Visual Condition and Tires

No visible damage, leaks, or missing components critical (required)

Check the body, overhead guard, carriage, and visible hoses for damage, leaks, cracks, or missing parts.

Yes No N/A

Tires free of cuts, chunking, excessive wear, and embedded debris critical (required)

Inspect all tires for condition, inflation/pressure where applicable, and signs of damage that could affect safe travel.

Yes No N/A

Wheel lugs, rims, and hubs appear secure critical (required)

Verify there are no missing lug nuts, cracked rims, or other visible wheel defects.

Yes No N/A

Forks are not cracked, bent, or excessively worn critical (required)

Inspect both forks for deformation, cracks, and wear at the heel and shank.

Yes No N/A

Mast, Chains, and Load Handling

Mast, chains, and rollers show no visible damage or abnormal wear critical (required)

Inspect mast rails, lift chains, and rollers for wear, corrosion, slack, or damage.

Yes No N/A

Load backrest and carriage are secure and intact critical (required)

Confirm the load backrest extension and carriage are properly installed and not damaged.

Yes No N/A

Load chart is present, legible, and matches the forklift configuration critical (required)

Verify the rated capacity/load chart is visible to the operator and corresponds to the installed attachments and mast configuration.

Yes No N/A

Operator Controls and Warning Devices

Horn operates properly critical (required)

Sound the horn to confirm it is audible and functional.

Yes No N/A

Steering responds smoothly and without excessive play critical (required)

Check steering response during slow controlled movement.

Yes No N/A

Brakes, parking brake, and directional controls function correctly critical (required)

Verify service brakes, parking brake, forward/reverse controls, and travel direction respond as expected.

Yes No N/A

Lights, alarms, and backup warning devices operate as required

Check headlights, work lights, strobe, reverse alarm, and other installed warning devices.

Yes No N/A

Fluid Levels, Safety Systems, and Housekeeping

No active fluid leaks under or around the forklift critical (required)

Check for hydraulic, fuel, coolant, or oil leaks on the ground or equipment surfaces.

Yes No N/A

Fluid levels are within acceptable operating range

Verify engine oil, hydraulic fluid, coolant, and fuel levels as applicable to the unit.

Yes No N/A

Seat belt, seat, and operator restraint are in good condition critical (required)

Inspect the seat belt or other restraint system for damage and proper operation.

Yes No N/A

Operator compartment is clean, unobstructed, and free of loose materials

Ensure pedals, controls, steps, and visibility are not obstructed by debris or tools.

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template. We won't sign you up to anything; you can opt in to the trial from the email if you want.

Email (required)

Your name (optional)

Run: Forklift Daily Pre-Shift Construction Inspection

Inspection Details

Visual Condition and Tires

Mast, Chains, and Load Handling

Operator Controls and Warning Devices

Fluid Levels, Safety Systems, and Housekeeping

Get your results