Run Embossing and Lamination First-Piece Approval Record — Free

Job Identification and Approval Basis

Job ticket, work order, or traveler matches the piece under review critical (required)

Yes No N/A

Approved sample, customer proof, or master standard is available at the press critical (required)

Yes No N/A

Material specification recorded

Record substrate, film, adhesive, foil, or other finishing material specification used for the first-piece check.

Inspector or approver name critical (required)

Approval timestamp critical (required)

Emboss Depth and Registration

Emboss depth matches approved sample or specification critical (required)

Enter measured emboss depth or depth setting used for approval.

Emboss registration within tolerance critical (required)

Record the measured registration offset from the approved position.

Emboss image is centered and aligned to the intended artwork or die position critical (required)

Yes No N/A

No visible distortion, crushing, or misstrike on the embossed area critical (required)

Yes No N/A

Lamination Bond and Surface Quality

Laminate bond is secure across the first piece critical (required)

Yes No N/A

No lifting, bubbling, silvering, delamination, or edge lift observed critical (required)

Yes No N/A

Surface finish matches approved gloss, matte, or specialty finish requirement

Yes No N/A

Adhesive transfer, haze, wrinkles, or contamination absent

Yes No N/A

Process Setup and Equipment Readiness

Temperature, pressure, and dwell settings recorded critical (required)

Die, roller, or platen condition acceptable for production critical (required)

Yes No N/A

Lockout-tagout or machine guarding requirements complied with during setup, if applicable critical (required)

Yes No N/A

Work area free of unsafe obstructions and housekeeping deficiencies

Yes No N/A

Disposition, Non-Conformance, and Release

First piece approved for production continuation critical (required)

Yes No N/A

Any non-conformance or deficiency documented

Yes No N/A

Corrective action or adjustment recorded before release

Approver signature critical (required)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Embossing and Lamination First-Piece Approval Record

Job Identification and Approval Basis

Emboss Depth and Registration

Lamination Bond and Surface Quality

Process Setup and Equipment Readiness

Disposition, Non-Conformance, and Release

Get your results