Run Electrical Rough-In Inspection Checklist — Free

Inspection Details and Scope

Project name / area inspected

Inspection date and time

Inspector name and role

Work area is ready for rough-in inspection before concealment critical (required)

Yes No N/A

Conduit, Raceway, and Cable Installation

Conduit fill does not exceed NEC allowable fill for installed raceway size and conductor count critical (required)

Yes No N/A

Photo evidence (optional)

Raceways and cables are protected from physical damage at penetrations, edges, and framing members critical (required)

Yes No N/A

Conduit and cable routing is continuous and free of unsupported spans, kinks, or sharp bends

Yes No N/A

Photo evidence (optional)

Raceway type installed matches the approved plan and location conditions

Note (optional)

Conductor identification and labeling are visible where required

Yes No N/A

Conduit and cable support intervals are installed per NEC and manufacturer requirements critical (required)

Yes No N/A

Boxes, Device Locations, and Fill

Outlet, junction, and device box fill is within allowable capacity critical (required)

Yes No N/A

Photo evidence (optional)

Boxes are securely fastened and set to proper depth for finish surface critical (required)

Yes No N/A

Box locations align with approved plans and device heights

Yes No N/A

Photo evidence (optional)

Openings in boxes are properly closed with approved fittings or plugs

Yes No N/A

Splices and terminations are contained within approved boxes or enclosures critical (required)

Yes No N/A

Grounding, Bonding, and Continuity

Equipment grounding conductors are installed and continuous to all required boxes and equipment critical (required)

Yes No N/A

Photo evidence (optional)

Bonding jumpers, bushings, and fittings are installed where required critical (required)

Yes No N/A

Metal raceways, enclosures, and boxes are bonded and mechanically secure

Yes No N/A

Grounding electrode conductor routing is protected from physical damage

Yes No N/A

Continuity and terminations appear ready for testing prior to energization

Yes No N/A

Separation, Coordination, and Worksite Safety

Electrical rough-in maintains required separation from plumbing, gas, HVAC, and low-voltage systems critical (required)

Yes No N/A

Photo evidence (optional)

Penetrations through studs, joists, or fire-rated assemblies are properly protected and sealed as required critical (required)

Yes No N/A

Working clearances and access to panels, junction boxes, and equipment are maintained

Yes No N/A

Temporary site conditions do not expose rough-in to damage, moisture, or unsafe contact

Yes No N/A

Final Readiness and Corrective Actions

All identified deficiencies and non-conformances are documented critical (required)

Yes No N/A

Corrective actions assigned to responsible party with target completion date

Inspection result

Note (optional)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Electrical Rough-In Inspection Checklist

Inspection Details and Scope

Conduit, Raceway, and Cable Installation

Boxes, Device Locations, and Fill

Grounding, Bonding, and Continuity

Separation, Coordination, and Worksite Safety

Final Readiness and Corrective Actions

Get your results