Templates › Inspections › SEO page

Run: Comforter Fill Power and Loft Measurement Log

Use this log to record fill power, fill weight, and loft measurements for comforters and verify the measured loft matches the labeled rating. It gives you a ...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Identification

Product identification matches the inspection record critical (required)

Verify product name, style, size, color, and SKU or item code match the lot being inspected.

Lot, batch, or production date recorded critical (required)

Record the lot number, batch number, or production date for traceability.

Inspection date and inspector recorded

Enter the date of inspection and the name or ID of the inspector.

Label claim documented critical (required)

Record the labeled fill power or loft claim being verified.

Reference standard or internal specification noted

Identify the internal test method, product specification, or customer requirement used for comparison.

Sample Condition and Test Setup

Sample is clean, dry, and conditioned before measurement critical (required)

Confirm the comforter has been conditioned per the applicable internal method before testing.

Yes No N/A

Measurement environment recorded

Record ambient temperature and relative humidity at the time of measurement.

Test equipment identified and calibrated critical (required)

Record the balance, loft gauge, chamber, or other measuring device used, and confirm calibration status is current.

Measurement method followed consistently critical (required)

Confirm the same method, sample orientation, and timing were used for all measurements in the lot.

Yes No N/A

Sample identification on test fixture or worksheet matches product record

Verify the sample tag, worksheet, or fixture label matches the lot and item being measured.

Fill Power and Fill Weight Measurements

Fill power recorded critical (required)

Enter measured fill power in cubic inches per ounce.

Fill weight recorded critical (required)

Enter the actual fill weight in ounces.

Fill power result meets labeled rating critical (required)

Confirm the measured fill power is at or above the labeled claim or internal acceptance limit.

Yes No N/A

Measurement repeatability within acceptable variance

Record whether repeated measurements fall within the allowed variance defined by the internal method.

Yes No N/A

Fill type identified

Select whether the comforter uses down, down alternative, or blended fill.

Loft Verification

Loft measurement recorded critical (required)

Enter the measured loft height using the approved method and unit.

Loft meets labeled rating critical (required)

Confirm the measured loft is consistent with the product's labeled loft claim or specification.

Yes No N/A

Loft measurement taken at required points

Confirm the required number of measurement points were used and recorded per the internal method.

Yes No N/A

Deficiencies, Disposition, and Sign-off

Deficiencies or non-conformances documented

Record any out-of-spec measurements, missing data, or method deviations.

Corrective action or disposition recorded

Document rework, retest, hold, reject, or release disposition as applicable.

Photo evidence attached when results are out of tolerance

Attach photos of the sample, measurement setup, or label when a deficiency is found.

Inspector signature completed

Inspector signs to confirm the measurements and findings are accurate.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free