Run Civil Underground Utility Locate Verification — Free

Locate Ticket and Work Area Verification

811 ticket is active, valid, and available on site critical (required)

Yes No N/A

Photo evidence (optional)

Planned dig area matches the ticket scope and marked limits critical (required)

Yes No N/A

Work area has been re-marked or refreshed if locate marks are faded or disturbed critical (required)

Yes No N/A

Photo evidence (optional)

Utility owner responses and special instructions are reviewed before digging critical (required)

Yes No N/A

No unverified utility conflicts are present in the planned excavation path critical (required)

Yes No N/A

Photo evidence (optional)

Pre-dig briefing completed with crew and competent person

Yes No N/A

White-Line and Surface Markings

White-lining clearly defines the intended excavation area critical (required)

Yes No N/A

Photo evidence (optional)

Locate markings are visible, continuous, and not obscured by debris or traffic critical (required)

Yes No N/A

Photo evidence (optional)

Marking colors and identifiers are consistent with utility owner markings critical (required)

Yes No N/A

Tolerance zone boundaries are identified and understood by the crew critical (required)

Yes No N/A

Markings remain intact after site access, traffic control, or equipment staging

Yes No N/A

Spotter and Crew Controls

Designated spotter is assigned where required critical (required)

Yes No N/A

Spotter maintains clear line of sight to excavation equipment and hazard area critical (required)

Yes No N/A

Photo evidence (optional)

Crew uses a defined communication method with the operator and spotter

Operator stops work when locate marks, spotter, or boundaries are unclear critical (required)

Yes No N/A

Crew members understand stop-work authority for utility exposure concerns critical (required)

Yes No N/A

Pre-Digging and Exposure Controls

Mechanical excavation is restricted within the tolerance zone until utilities are exposed or otherwise protected critical (required)

Yes No N/A

Photo evidence (optional)

Hand digging or vacuum excavation is used where required for utility exposure critical (required)

Yes No N/A

Utility crossings, crossings depth, and known conflict points are identified before digging critical (required)

Yes No N/A

Photo evidence (optional)

Spoil pile, equipment staging, and access routes do not obscure markings or create added utility risk

Yes No N/A

Required PPE for excavation and utility exposure is available and in use

Yes No N/A

Weather, soil, or site conditions require a pause or re-check before digging critical (required)

Yes No N/A

Depth Check and Excavation Compliance

Measured excavation depth is within approved limits for the current work stage critical (required)

Depth measurement method is documented and repeatable

Exposed utilities are protected from damage, movement, or load transfer critical (required)

Yes No N/A

Photo evidence (optional)

Any deviation from the locate plan is documented and escalated critical (required)

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Civil Underground Utility Locate Verification

Locate Ticket and Work Area Verification

White-Line and Surface Markings

Spotter and Crew Controls

Pre-Digging and Exposure Controls

Depth Check and Excavation Compliance

Get your results