Run Chiller Eddy Current Tube Test Report — Free

Inspection Identification

Inspection date and time critical (required)

Facility name and location critical (required)

Chiller asset ID / equipment tag critical (required)

Inspection scope critical (required)

Work order / service ticket number

Inspector / technician name critical (required)

Supervisor or client representative

Reference standard or procedure used

Enter the governing procedure, OEM guidance, or site-specific NDE procedure used for this test.

Test Equipment and Method

Eddy current instrument model and serial number critical (required)

Probe type and size critical (required)

Calibration / reference standard verified critical (required)

Confirm the instrument was calibrated and verified against an appropriate reference standard before testing.

Yes No N/A

Calibration date

Test frequency / setup parameters recorded critical (required)

Confirm that test frequency, gain, phase, and other setup parameters were documented.

Yes No N/A

Tube cleaning completed before test

Confirm tubes were cleaned sufficiently to allow reliable probe travel and signal interpretation.

Yes No N/A

Access limitations or obstructions noted

Yes No N/A

Environmental or operating conditions affecting test

Record any conditions that may affect signal quality, access, or interpretation.

Tube Count and Coverage

Condenser tube count inspected critical (required)

Condenser tube count available

Evaporator tube count inspected critical (required)

Evaporator tube count available

Coverage percentage achieved critical (required)

Enter the percentage of intended tubes successfully tested.

Untested tubes identified and reason

List any tubes not tested and the reason, such as access limitation, blockage, or equipment restriction.

Tube sheet or bundle identification method

Describe how tube locations were identified or mapped for traceability.

Defect Findings

Any defect indications detected critical (required)

Mark yes if any relevant indications such as wall loss, pitting, cracking, wear, or tube thinning were found.

Yes No N/A

Number of tubes with indications

Defect type(s) observed

Most severe indication location

Identify the tube number, row, bundle, or location of the most significant indication.

Severity assessment critical (required)

Rate the overall severity of the tube findings.

Leak risk or service impact critical (required)

Photo evidence of representative indications

Attach photos when available to support defect interpretation and location tracking.

Recommendations and Sign-Off

Recommended disposition critical (required)

Number of tubes recommended for plugging

Number of tubes recommended for replacement

Corrective action details critical (required)

Summarize the recommended repair plan, affected tube locations, and any follow-up testing needed.

Inspector signature critical (required)

Client or supervisor acknowledgment

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Chiller Eddy Current Tube Test Report

Inspection Identification

Test Equipment and Method

Tube Count and Coverage

Defect Findings

Recommendations and Sign-Off

Get your results