Run Chemical Loading and Unloading Audit — Free

Pre-Transfer Setup and Area Control

Loading/unloading area is designated, barricaded, and restricted to authorized personnel critical (required)

Yes No N/A

Transfer path and staging area are free of obstructions, ignition sources, and incompatible materials critical (required)

Yes No N/A

Weather and environmental conditions are acceptable for safe transfer

Hoses, couplings, valves, and fittings are staged and visibly in good condition

Yes No N/A

SDS, transfer procedure, and emergency contacts are available at point of use critical (required)

Yes No N/A

Bonding, Grounding, and Static Control

Bonding cable is connected between source and receiving equipment before transfer begins critical (required)

Yes No N/A

Grounding connection is verified and secure for all applicable transfer equipment critical (required)

Yes No N/A

Bonding and grounding equipment is inspected for damage, corrosion, or loose connections critical (required)

Yes No N/A

Continuity or verification method is documented before transfer

Yes No N/A

Static control controls are used consistently during hose connection, transfer, and disconnection

Transfer Equipment and Spill Prevention

Hoses, gaskets, seals, and connections show no visible leaks, cracks, bulges, or wear critical (required)

Yes No N/A

Valves, pumps, and transfer controls operate as intended and are labeled correctly

Yes No N/A

Secondary containment or drip control is in place and sized appropriately for the operation critical (required)

Yes No N/A

Overfill prevention controls are present and functional where applicable critical (required)

Yes No N/A

Spill kits are positioned within immediate reach of the transfer area critical (required)

Yes No N/A

Personal Protective Equipment (PPE)

Required PPE is specified by the task hazard assessment or SOP critical (required)

Yes No N/A

Operators are wearing required eye and face protection, gloves, and protective clothing critical (required)

Yes No N/A

Respiratory protection is available and used when required by the hazard assessment

Yes No N/A

PPE is clean, serviceable, and correctly sized for the task

Yes No N/A

Emergency Response Readiness

Emergency shutdown procedure is posted or immediately available critical (required)

Yes No N/A

Eyewash and safety shower are accessible, unobstructed, and within required travel distance critical (required)

Yes No N/A

Communication method for summoning emergency assistance is functional and known to operators critical (required)

Yes No N/A

Spill response roles and escalation steps are understood by the crew

Get your results

Enter your email — we'll send you a PDF of your filled-out template. We won't sign you up to anything; you can opt in to the trial from the email if you want.

Email (required)

Your name (optional)

Run: Chemical Loading and Unloading Audit

Pre-Transfer Setup and Area Control

Bonding, Grounding, and Static Control

Transfer Equipment and Spill Prevention

Personal Protective Equipment (PPE)

Emergency Response Readiness

Get your results