Run Checkweigher Verification and Calibration Log — Free

Inspection Details

Inspection date and time recorded critical (required)

Production line and checkweigher ID identified critical (required)

Product or SKU being run

Inspector or operator name critical (required)

Inspection type

Equipment Condition and Readiness

Checkweigher is clean, powered on, and ready for use critical (required)

Yes No N/A

Conveyor, guides, and product flow path are clear of obstructions critical (required)

Yes No N/A

Display, controls, and alarms are functioning normally critical (required)

Yes No N/A

Last calibration or verification label is current

Yes No N/A

Test Weight Verification

Test weight set used for verification critical (required)

Nominal test weight value critical (required)

Measured result at low end of operating range critical (required)

Measured result at target or nominal weight critical (required)

Measured result at high end of operating range critical (required)

All test weight results are within the approved tolerance critical (required)

Yes No N/A

Reject Function Confirmation

Reject device actuates when an out-of-spec test pack is introduced critical (required)

Yes No N/A

Rejected unit is diverted to the correct reject bin or lane critical (required)

Yes No N/A

Reject confirmation is visible and documented by the system or operator critical (required)

Yes No N/A

Reject timing and response are acceptable

Calibration Status and Outcome

Calibration adjustment was required

Yes No N/A

Calibration completed successfully critical (required)

Yes No N/A

Equipment returned to service after verification critical (required)

Yes No N/A

Deficiencies and Corrective Actions

Deficiencies or non-conformances noted

Corrective action taken

Supervisor or QA review completed

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Checkweigher Verification and Calibration Log

Inspection Details

Equipment Condition and Readiness

Test Weight Verification

Reject Function Confirmation

Calibration Status and Outcome

Deficiencies and Corrective Actions

Get your results