Run Cathodic Protection Rectifier Inspection — Free

Inspection Details

Asset ID / Rectifier location

Identify the rectifier, station, or impressed current source being inspected.

Inspection date and time critical (required)

Record when the inspection was performed.

Inspection interval within required frequency critical (required)

Confirm this inspection is part of the required recurring schedule and that no interval exceeds 2.5 months.

Yes No N/A

Rectifier Enclosure and Site Condition

Enclosure secure, intact, and weather-resistant critical (required)

Verify the cabinet, door, hinges, latches, and seals are intact and protect the equipment from weather and unauthorized access.

Yes No N/A

Access to rectifier unobstructed critical (required)

Confirm the rectifier is accessible for inspection and maintenance without obstruction.

Yes No N/A

Warning labels and identification legible

Verify equipment identification, hazard labels, and operating markings are present and readable.

Yes No N/A

Evidence of overheating, corrosion, or physical damage critical (required)

Check for discoloration, burnt components, rust, leaks, loose wiring, or other visible defects.

Yes No N/A

Photo evidence (optional)

Electrical Condition and Output Readings

AC input present critical (required)

Confirm incoming AC power is available to the rectifier.

Yes No N/A

DC output voltage critical (required)

Record the rectifier DC output voltage.

Note (optional)

DC output current critical (required)

Record the rectifier DC output current.

Note (optional)

Output within expected operating range critical (required)

Confirm the measured output is consistent with the established operating setpoint or normal operating range for this asset.

Yes No N/A

Meters and indicators functioning critical (required)

Verify analog or digital meters, indicator lights, and displays are operating and readable.

Yes No N/A

Protection Performance and Controls

Current and voltage controls stable critical (required)

Verify adjustment controls are secure and the output is stable during the inspection.

Yes No N/A

Alarm or fault indicators normal critical (required)

Confirm there are no active alarms, fault lights, or abnormal indicator conditions.

Yes No N/A

Reference electrode / test point condition acceptable

If applicable to the site, verify test points, leads, and reference electrode connections are intact and usable.

Yes No N/A

Abnormal noise, odor, or vibration observed critical (required)

Check for abnormal transformer hum, burning odor, arcing, or unusual vibration.

Yes No N/A

Photo evidence (optional)

Deficiencies, Corrective Actions, and Sign-Off

Deficiencies identified

Select any observed deficiencies or non-conformances.

Note (optional)

Corrective action required critical (required)

Indicate whether maintenance, repair, or follow-up testing is required.

Yes No N/A

Inspector signature critical (required)

Inspector attestation that the inspection was completed and the recorded information is accurate.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Cathodic Protection Rectifier Inspection

Inspection Details

Rectifier Enclosure and Site Condition

Electrical Condition and Output Readings

Protection Performance and Controls

Deficiencies, Corrective Actions, and Sign-Off

Get your results