Templates › Inspections › SEO page

Run: AWWA C600 Water Main Hydrostatic Test Report

Document a water main hydrostatic test with the fields needed to record segment details, test pressure, two-hour hold results, leakage calculation, and accep...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Test Identification

Project name and test segment identified

Record the project name, test location, pipe segment limits, and stationing or drawing reference.

Test date and start time recorded critical (required)

Document when the hydrostatic test began.

Note (optional)

Inspector and contractor representatives identified

Record names and roles of the inspector, contractor representative, and any witnessing authority.

Main and Test Segment Details

Pipe material, diameter, and length recorded critical (required)

Document pipe material, nominal diameter, and total test length for the segment.

Appurtenances and fittings included in test segment

Select all items included in the test section.

Note (optional)

Test section isolated and restrained critical (required)

Verify the main is isolated, restrained, and ready for pressure testing without unintended movement.

Yes No N/A

Pre-Test Readiness and Safety

Test equipment calibrated and suitable for test pressure critical (required)

Verify gauges, pumps, hoses, and fittings are in serviceable condition and appropriate for the required pressure range.

Yes No N/A

Test pressure gauge reading recorded critical (required)

Record the stabilized gauge reading used for the test.

Note (optional)

Work area controlled and safe for inspection critical (required)

Verify access control, traffic control, and PPE are in place; no unsafe conditions are present during pressurization.

Yes No N/A

Hydrostatic Test Execution

Test pressure maintained for required two-hour hold critical (required)

Confirm the main was held at the specified test pressure for a continuous two-hour period in accordance with the acceptance procedure.

Yes No N/A

Start and end pressure recorded critical (required)

Document the pressure at the start and end of the hold period, including any observed fluctuations.

Observed leakage during hold critical (required)

Record the measured leakage observed during the test hold period.

Note (optional)

Leakage Calculation and Acceptance

Allowable leakage calculated and documented critical (required)

Record the allowable leakage calculation used for the test, including the basis and any formula inputs.

Observed leakage within allowable limit critical (required)

Confirm the measured leakage did not exceed the allowable leakage for the test segment.

Yes No N/A

Test result accepted critical (required)

Mark whether the water main hydrostatic test is accepted based on pressure hold and leakage criteria.

Yes No N/A

Deficiencies, Corrective Actions, and Sign-Off

Deficiencies or non-conformances documented

Record any leaks, pressure loss, equipment issues, or other non-conformances observed during the test.

Corrective actions completed or scheduled

Describe repairs, retesting requirements, or follow-up actions needed before acceptance.

Inspector signature critical (required)

Inspector signs to confirm the record is complete and accurate.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free