Templates › Inspections › SEO page

Run: ASTM C216 Face Brick Lot Sampling and Acceptance Inspection

Use this ASTM C216 face brick lot sampling and acceptance inspection to trace each lot, document visual and dimensional checks, and record ASTM C67 test sele...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Details and Lot Identification

Project, plant, and inspector information recorded

Record project name, plant name, inspector name, date, and inspection location.

Brick lot identification is traceable critical (required)

Document lot number, production date range, shipment ID, pallet count, and any associated mill or kiln run identifiers.

Applicable specification confirmed as ASTM C216 critical (required)

Confirm the lot is being evaluated as face brick under ASTM C216 and that the correct product classification is identified.

Yes No N/A

Reference test method confirmed as ASTM C67 critical (required)

Confirm the required acceptance tests will be performed using ASTM C67 procedures as applicable to the lot.

Yes No N/A

Sampling Plan and Chain of Custody

Required sample size pulled from the lot critical (required)

Enter the number of units sampled from the lot for inspection and testing.

Note (optional)

Sample size meets the approved lot sampling plan critical (required)

Verify the number of units pulled matches the approved sampling plan for the lot and plant procedure.

Yes No N/A

Sample units are representative of the lot critical (required)

Confirm units were selected from the lot in a manner that represents the production run and shipment condition, without obvious bias.

Yes No N/A

Chain of custody maintained critical (required)

Confirm sampled units were labeled, secured, and transferred without mix-up or loss of identity.

Yes No N/A

Photo evidence (optional)

Visual and Dimensional Acceptance

Units are free of critical visual defects critical (required)

Check for cracks, severe chips, warpage, laminations, or other defects that would constitute a non-conformance for face brick acceptance.

Yes No N/A

Photo evidence (optional)

Color and texture are within specified range

Verify the sampled units are consistent with the approved color range, texture, and finish for the specified face brick product.

Yes No N/A

Dimensions measured and recorded

Record measured length, width, and height for the sampled units or the applicable dimensional summary used for acceptance.

Dimensional variation is within project criteria critical (required)

Confirm measured dimensions and tolerances meet the approved project specification and ASTM C216 acceptance criteria.

Yes No N/A

ASTM C67 Test Selection and Results

Required ASTM C67 tests identified critical (required)

Select the tests required for this lot based on the product specification and acceptance plan.

Note (optional)

Test specimens submitted match sampled units critical (required)

Confirm the specimens submitted to the lab correspond to the sampled lot units and were not substituted.

Yes No N/A

Laboratory results recorded

Enter the test results, including measured values, pass/fail status, and any relevant averages or ranges.

Test results meet acceptance criteria critical (required)

Confirm the ASTM C67 results and any project-specific acceptance limits are satisfied for the lot.

Yes No N/A

Disposition, Deficiencies, and Sign-Off

Non-conformances documented

List any deficiencies, deviations from the sampling plan, damaged units, or failed tests.

Lot disposition assigned critical (required)

Select the final disposition for the lot based on inspection and test results.

Note (optional)

Inspector signature critical (required)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free