Run Arc Flash PPE and FR Clothing Pre-Job Verification — Free

Job Scope and Electrical Hazard Confirmation

Work location and equipment identified critical (required)

Confirm the exact equipment, lineup, panel, switchgear, or circuit location where work will occur.

Yes No N/A

Task requires energized or near-energized work critical (required)

Confirm the job scope includes energized work or work within the arc flash boundary.

Yes No N/A

Incident energy or PPE category verified for location critical (required)

Confirm the incident energy value or NFPA 70E PPE category used to select clothing and PPE for this location.

Arc flash boundary communicated to crew critical (required)

Confirm the arc flash boundary has been communicated and crews understand access limits.

Yes No N/A

Shock and arc flash hazards reviewed in pre-job briefing critical (required)

Confirm the crew reviewed the specific electrical hazards, approach limits, and job steps before starting.

Yes No N/A

Arc-Rated Clothing Selection

Arc-rated clothing rating meets or exceeds required incident energy critical (required)

Confirm the shirt, pants, coverall, or suit arc rating is appropriate for the identified hazard.

Yes No N/A

Flame-resistant clothing worn as required critical (required)

Confirm all required base layers and outer layers are flame-resistant and appropriate for the task.

Yes No N/A

No non-FR synthetic layers exposed critical (required)

Confirm no prohibited non-FR garments are exposed in the hazard zone, including meltable synthetic layers.

Yes No N/A

Clothing condition acceptable critical (required)

Inspect for holes, tears, contamination, oil, grease, or other damage that could reduce protection.

Yes No N/A

Photo evidence (optional)

Layering and coverage adequate critical (required)

Confirm sleeves, torso, legs, and closure points provide full coverage for the expected exposure.

Yes No N/A

PPE Components and Fit

Arc-rated face shield or hood selected for task critical (required)

Confirm the selected face protection matches the task hazard and provides required coverage.

Yes No N/A

Voltage-rated gloves available and inspected critical (required)

Confirm rubber insulating gloves and leather protectors, if required, are present and free of visible damage.

Yes No N/A

Photo evidence (optional)

Eye and head protection compatible with arc flash ensemble critical (required)

Confirm safety glasses, hard hat, balaclava, hood, and face protection are compatible and not creating gaps.

Yes No N/A

PPE fit allows full movement without exposure gaps critical (required)

Confirm PPE fits the wearer and does not shift, gap, or expose skin during normal work motions.

Yes No N/A

Required PPE items present at point of use critical (required)

Confirm all required PPE is on hand at the job location before work starts.

Yes No N/A

Equipment Condition and Readiness

PPE inspection dates current where applicable critical (required)

Confirm inspection or test dates are current for items that require periodic verification.

Yes No N/A

PPE free of contamination and damage critical (required)

Confirm PPE is clean, dry, and free from oil, grease, chemical contamination, burns, or other defects.

Yes No N/A

Photo evidence (optional)

Tools and accessories suitable for energized work critical (required)

Confirm insulated tools, test instruments, and accessories required for the task are appropriate and in serviceable condition.

Yes No N/A

Replacement PPE available if item fails inspection

Confirm backup PPE is available if any item is found defective or out of compliance.

Yes No N/A

Authorization, Controls, and Closeout

Qualified worker or competent person performed verification critical (required)

Confirm the PPE and clothing verification was completed by a qualified worker, supervisor, or competent person.

Yes No N/A

Crew briefed on stop-work trigger for PPE deficiency critical (required)

Confirm the crew understands work must stop if PPE is missing, damaged, or not rated for the task.

Yes No N/A

No unresolved PPE non-conformance remains critical (required)

Confirm all deficiencies identified during verification were corrected before work begins.

Yes No N/A

Inspector signature critical (required)

Signature of the person completing the pre-job verification.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Arc Flash PPE and FR Clothing Pre-Job Verification

Job Scope and Electrical Hazard Confirmation

Arc-Rated Clothing Selection

PPE Components and Fit

Equipment Condition and Readiness

Authorization, Controls, and Closeout

Get your results