Templates › Inspections › SEO page

Run: Anilox Roll Inspection and Cleaning Log

Anilox Roll Inspection and Cleaning Log for recording roll ID, cell volume, cleaning status, and surface condition before press use. It helps catch plugged, ...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Details

Roll ID recorded critical (required)

Enter the unique anilox roll identifier or asset number.

Inspection date and time recorded critical (required)

Record when the inspection or post-cleaning verification was completed.

Inspector name recorded

Name or employee ID of the person performing the inspection.

Press or line location identified

Identify the press, line, or station where the roll is used.

Reference SOP or cleaning procedure available

Confirm the inspection is being performed against the current cleaning and handling procedure.

Yes No N/A

Roll Specifications

Line count verified critical (required)

Record the measured line count for the roll.

Note (optional)

Cell volume verified critical (required)

Record the measured cell volume for the roll.

Note (optional)

Cell geometry matches specification critical (required)

Confirm the roll cell pattern and engraving condition match the approved specification for the job.

Yes No N/A

Roll surface free of visible wear beyond acceptable limits

Rate the overall surface condition of the roll.

Cleaning Verification

Cleaning date recorded critical (required)

Record the date and time the roll was last cleaned.

Cleaning method documented

Select the cleaning method used.

Cleaning complete with no residue visible critical (required)

Confirm the roll is free of dried ink, coating, or cleaning residue after cleaning.

Yes No N/A

Cleaning verification photo captured

Attach a photo showing the cleaned roll surface and engraving condition.

Cleaning chemicals handled per SDS and PPE requirements critical (required)

Confirm chemical handling followed the applicable safety data sheet and required PPE.

Yes No N/A

Condition Assessment

Roll is free of scoring or gouging critical (required)

Check for scratches, scoring, gouges, or other damage that can affect ink transfer.

Yes No N/A

Cells are not plugged or blinded critical (required)

Verify cells are open and free of plugging, blinding, or contamination.

Yes No N/A

Roll surface condition critical (required)

Select the overall service condition of the roll.

Condition notes documented

Describe any scoring, plugging, wear, corrosion, or other defects observed.

Corrective Action and Sign-Off

Deficiencies documented with corrective action

Record any non-conformance, including plugged cells, scoring, or failed cleaning, and note the corrective action taken.

Yes No N/A

Note (optional)

Roll released for production use critical (required)

Confirm the roll is approved for use based on the inspection results.

Yes No N/A

Follow-up inspection required

Indicate whether a recheck is needed after additional cleaning, repair, or reconditioning.

Yes No N/A

Inspector signature

Sign to confirm the inspection record is complete and accurate.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free