Templates › Inspections › SEO page

Run: Anchor Bolt Plan Verification Inspection

Use this Anchor Bolt Plan Verification Inspection to confirm bolt pattern, size, projection, and layout against the approved drawing before concrete placemen...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Record and Drawing Control

Project, building line, and foundation area identified

Record the project name, building line, bay, grid, or foundation area being inspected.

Anchor bolt drawing revision matches approved documents critical (required)

Verify the anchor bolt plan revision matches the latest approved structural drawings and base plate details.

Related base plate and frame layout documents available on site critical (required)

Confirm the anchor bolt plan, base plate details, and frame layout drawings are available for field comparison.

Yes No N/A

Inspector and date recorded

Enter the inspector name, company, and inspection date/time.

Anchor Bolt Pattern and Grid Layout

Anchor bolt pattern matches plan view layout critical (required)

Verify the number of bolts, spacing, and arrangement match the anchor bolt drawing and base plate layout.

Yes No N/A

Bolt locations align with structural grid lines and column centerlines critical (required)

Confirm bolt locations are set to the correct grid lines, centerlines, and offsets shown on the approved drawings.

Yes No N/A

Measured bolt-to-bolt spacing

Record the measured spacing between anchor bolts and compare to the drawing dimension.

Note (optional)

Measured bolt offset from grid or centerline

Record the measured offset from the specified grid line or centerline.

Note (optional)

Bolt Size, Projection, and Embedment

Anchor bolt diameter matches drawing critical (required)

Verify the installed anchor bolt size matches the specified diameter on the anchor bolt plan.

Anchor bolt projection above concrete matches required dimension critical (required)

Measure the exposed bolt projection above finished concrete and compare to the required projection.

Anchor bolt embedment or hook configuration matches detail critical (required)

Confirm embedment depth, hook, bend, or anchorage detail matches the approved anchor bolt drawing.

Yes No N/A

Bolt threads, nuts, and washers are present where required

Verify required hardware is installed and usable for base plate installation.

Yes No N/A

Base Plate and Frame Compatibility

Base plate hole pattern matches anchor bolt layout critical (required)

Confirm the base plate hole pattern, spacing, and orientation match the installed anchor bolt pattern.

Yes No N/A

Column or frame member can be set without interference critical (required)

Verify there is adequate clearance for the frame member, base plate, and leveling hardware to be installed without field modification.

Yes No N/A

Anchor bolt projection supports nut, washer, and grout allowance

Confirm the exposed projection allows for the required nut engagement, washer thickness, and grout or leveling allowance.

Yes No N/A

Deficiencies, Evidence, and Closeout

Deficiencies documented with location and corrective action critical (required)

Record any non-conformance, the exact location, and the corrective action required before release.

Photo evidence captured for discrepancies or critical measurements

Attach photos showing layout, measurements, and any observed deficiency.

Inspection signed off by responsible party

Signature of the inspector or responsible verifier confirming the inspection results.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free