Templates › Inspections › SEO page

Run: ADAS Calibration Prerequisite Verification Sheet

Verify every ADAS calibration prerequisite before setup, from OEM procedure review to bay conditions and vehicle measurements. This sheet helps collision rep...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Details

Repair order number recorded critical (required)

Vehicle year, make, model, and VIN recorded critical (required)

Calibration type identified critical (required)

OEM Procedure and Documentation

OEM calibration procedure reviewed before setup critical (required)

Verify the current OEM procedure or service information was reviewed for this vehicle and calibration event.

Yes No N/A

Required special tools, targets, and scan tools available critical (required)

Confirm all OEM-specified targets, fixtures, scan tools, and accessories are present and serviceable.

Yes No N/A

Photo evidence (optional)

Vehicle not modified in a way that affects calibration prerequisites critical (required)

Confirm no unresolved suspension, wheel, tire, ride height, steering, or body condition exists that would invalidate calibration setup.

Yes No N/A

Vehicle Setup Conditions

Tire pressures set to OEM specification critical (required)

Fuel level within OEM-required range critical (required)

Ride height within OEM specification critical (required)

Vehicle loaded condition matches OEM requirement critical (required)

Verify required cargo, ballast, occupants, or empty-vehicle condition is set per OEM procedure.

Yes No N/A

Suspension and steering components visually verified as complete and secure critical (required)

Confirm no obvious looseness, missing fasteners, or unresolved damage that would affect calibration geometry.

Yes No N/A

Calibration Bay and Environmental Conditions

Floor levelness within OEM tolerance critical (required)

Calibration area clear of obstructions and reflective interference critical (required)

Verify the target path, sensor line of sight, and working area are free of tools, carts, people, glare sources, and other interference.

Yes No N/A

Photo evidence (optional)

Lighting conditions meet OEM requirements critical (required)

Confirm ambient and task lighting are within the OEM procedure for the calibration being performed.

Yes No N/A

Wheel alignment rack or bay setup verified for calibration use critical (required)

Confirm the vehicle is positioned on the correct surface and equipment, with any required turn plates or slip plates installed and released.

Yes No N/A

Target distances and centerline measurements set per OEM critical (required)

Final Readiness and Sign-Off

All prerequisite checks completed with no unresolved deficiencies critical (required)

Use this item only when every required prerequisite has been verified and any out-of-spec condition has been corrected or escalated.

Yes No N/A

Corrective actions documented for any failed prerequisite critical (required)

Inspector signature critical (required)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free