Warehouse Fire Extinguisher Audit

Inspection template for verifying warehouse fire extinguisher placement, type, travel distance, signage, accessibility, and inspection tag status.

Inspection Details

• Inspection date and time recorded
  Record when the audit was performed.
• Inspection area or warehouse zone identified
  Identify the aisle, bay, dock, mezzanine, or zone inspected.
• Inspector name and signature completed
  Inspector must sign to confirm the findings.
• Inspection type selected
  Select the inspection type.

Extinguisher Placement and Coverage

• Extinguisher is installed in the designated location
  Verify each extinguisher is located where the site fire protection plan or posted layout specifies.
• Extinguisher is mounted or stored at the correct height and orientation
  Check that the extinguisher is secured, visible, and positioned for immediate removal and use.
• Extinguisher type matches the hazard in the area
  Confirm the extinguisher classification is appropriate for the hazard present in the zone.
• Travel distance to nearest extinguisher is within site requirement
  Measure the approximate travel distance from the farthest point in the area to the nearest extinguisher.
• Extinguisher coverage is adequate for the area layout
  Rate whether extinguisher placement provides practical coverage for aisles, docks, storage racks, and workstations.

Visibility, Signage, and Accessibility

• Extinguisher is clearly visible from the normal approach path
  Verify the extinguisher can be readily seen by employees and visitors approaching the area.
• Required extinguisher signage is present and legible
  Check for location signage, directional markers, or wall identification where needed.
• Access to extinguisher is unobstructed
  No pallets, cartons, shrink wrap, equipment, or stored materials block access to the extinguisher.
• Extinguisher can be reached without moving stored product or equipment
  Confirm the extinguisher is immediately usable without rearranging inventory or using tools.

Condition and Inspection Tag Status

• Inspection tag is present on the extinguisher
  Verify the monthly inspection tag or equivalent record is attached to the unit.
• Inspection tag is current and signed for the required interval
  Confirm the tag shows the latest required inspection and is not overdue.
• Extinguisher shows no visible damage, corrosion, leakage, or missing parts
  Inspect the cylinder, hose, nozzle, pin, tamper seal, handle, and pressure indicator for visible defects.
• Pressure gauge is in the operable range
  Confirm the gauge needle is in the green or otherwise acceptable operating range per manufacturer instructions.

Corrective Actions and Follow-Up

• Deficiencies documented with corrective actions assigned
  List each deficiency or non-conformance, the corrective action required, responsible person, and target completion date.
• Follow-up inspection required
  Indicate whether a follow-up inspection is needed after corrective action completion.