Run Warehouse Fire Extinguisher Audit — Free

Inspection Details

Inspection date and time recorded

Record when the audit was performed.

Inspection area or warehouse zone identified

Identify the aisle, bay, dock, mezzanine, or zone inspected.

Inspector name and signature completed

Inspector must sign to confirm the findings.

Inspection type selected

Select the inspection type.

Extinguisher Placement and Coverage

Extinguisher is installed in the designated location critical (required)

Verify each extinguisher is located where the site fire protection plan or posted layout specifies.

Yes No N/A

Extinguisher is mounted or stored at the correct height and orientation critical (required)

Check that the extinguisher is secured, visible, and positioned for immediate removal and use.

Yes No N/A

Extinguisher type matches the hazard in the area critical (required)

Confirm the extinguisher classification is appropriate for the hazard present in the zone.

Travel distance to nearest extinguisher is within site requirement critical (required)

Measure the approximate travel distance from the farthest point in the area to the nearest extinguisher.

Extinguisher coverage is adequate for the area layout

Rate whether extinguisher placement provides practical coverage for aisles, docks, storage racks, and workstations.

Visibility, Signage, and Accessibility

Extinguisher is clearly visible from the normal approach path critical (required)

Verify the extinguisher can be readily seen by employees and visitors approaching the area.

Yes No N/A

Required extinguisher signage is present and legible critical (required)

Check for location signage, directional markers, or wall identification where needed.

Yes No N/A

Access to extinguisher is unobstructed critical (required)

No pallets, cartons, shrink wrap, equipment, or stored materials block access to the extinguisher.

Yes No N/A

Extinguisher can be reached without moving stored product or equipment critical (required)

Confirm the extinguisher is immediately usable without rearranging inventory or using tools.

Yes No N/A

Condition and Inspection Tag Status

Inspection tag is present on the extinguisher critical (required)

Verify the monthly inspection tag or equivalent record is attached to the unit.

Yes No N/A

Inspection tag is current and signed for the required interval critical (required)

Confirm the tag shows the latest required inspection and is not overdue.

Yes No N/A

Extinguisher shows no visible damage, corrosion, leakage, or missing parts critical (required)

Inspect the cylinder, hose, nozzle, pin, tamper seal, handle, and pressure indicator for visible defects.

Yes No N/A

Pressure gauge is in the operable range critical (required)

Confirm the gauge needle is in the green or otherwise acceptable operating range per manufacturer instructions.

Yes No N/A

Corrective Actions and Follow-Up

Deficiencies documented with corrective actions assigned

List each deficiency or non-conformance, the corrective action required, responsible person, and target completion date.

Follow-up inspection required

Indicate whether a follow-up inspection is needed after corrective action completion.

Get your results

Enter your email — we'll send you a PDF of your filled-out template. We won't sign you up to anything; you can opt in to the trial from the email if you want.

Email (required)

Your name (optional)

Run: Warehouse Fire Extinguisher Audit

Inspection Details

Extinguisher Placement and Coverage

Visibility, Signage, and Accessibility

Condition and Inspection Tag Status

Corrective Actions and Follow-Up

Get your results