Supercenter Vision Center Equipment Calibration Log

Daily calibration and readiness inspection for supercenter optical and vision center equipment, including auto-refractor, lensometer, slit lamp, and tonometer function verification.

Inspection Details

• Inspection date and time recorded
• Store or vision center location identified
• Inspector name and role documented
• Applicable equipment SOP or calibration reference available

General Readiness and Safety

• Work area clean, dry, and free of obstructions around equipment
• Power cords, plugs, and visible cables show no damage or trip hazard
• Equipment surfaces and patient-contact areas cleaned and disinfected per SOP
• Required PPE available for cleaning or adjustment tasks

Auto-Refractor Verification

• Auto-refractor powers on and completes startup without error
• Calibration check passes using manufacturer or internal reference target
• Displayed measurement values are within acceptable tolerance
• Lens port, chin rest, and forehead rest are clean and unobstructed

Lensometer Verification

• Lensometer powers on and zero/reference check completes successfully
• Sphere and cylinder readings verified against calibration lens
• Axis alignment indicator is stable and readable
• Lens stage, eyepiece, and contact surfaces are clean

Slit Lamp and Tonometer Verification

• Slit lamp powers on and illumination controls function across settings
• Slit lamp optics, joystick, and patient support surfaces are clean and functional
• Tonometer powers on and self-check completes without fault
• Tonometer calibration or test verification is within acceptable range

Deficiencies and Sign-Off

• Any deficiencies, non-conformances, or out-of-tolerance results documented
• Equipment removed from service when calibration or function check failed
• Corrective action owner and expected completion time recorded
• Inspector signature