Power Strip Daisy Chain and Home Run Audit

Inspection template for verifying that power strips are fed from dedicated home runs and are not daisy chained to additional receptacles. Intended for data centers and other controlled electrical environments to reduce overload and fire risk.

Inspection Details

• Inspection scope and location documented
  Record the room, row, rack, workstation, or electrical zone being inspected.
• Inspector name and role recorded
  Identify the person performing the inspection and their role or department.
• Inspection date and time recorded
  Capture when the inspection was performed.

Power Strip Feed Verification

• Each power strip is connected to a dedicated receptacle or approved home run
  Verify the power strip is supplied by a dedicated circuit path and not shared through another strip or unapproved adapter.
• No power strip is plugged into another power strip
  Confirm there is no daisy chaining of power strips, surge protectors, or multi-outlet devices.
• No extension cord is used to feed a power strip as a permanent installation
  Verify power strips are not being supplied by extension cords or temporary wiring in lieu of a proper receptacle/home run.
• Power strip labeling or circuit identification is present where required
  Check whether the strip or receptacle is identified to support traceability to the intended circuit or equipment load.

Load and Capacity Review

• Connected load appears within the rated capacity of the power strip
  Verify the connected devices do not appear to exceed the strip's nameplate rating or visible load limit.
• No signs of overheating, discoloration, or damaged plugs
  Inspect plugs, cords, and strip housing for heat damage, melting, scorch marks, or deformation.
• Power strip is mounted or positioned to avoid strain on plugs and cords
  Confirm cords are not under tension, pinched, or routed in a way that could loosen connections or create damage.
• Visible cord management does not create a trip or pinch hazard
  Check that the cord path is controlled and does not create an immediate physical hazard in the work area.

Installation and Environmental Conditions

• Power strips are not placed under carpets, rugs, or concealed in a way that impedes inspection
  Verify the strip and cord are visible and accessible for routine inspection and do not present a concealed overheating risk.
• Power strip is free from liquid exposure, dust accumulation, or physical damage
  Inspect for environmental conditions that could compromise electrical safety or equipment integrity.
• Receptacle and plug connections are secure and fully seated
  Confirm there are no loose, partially inserted, or unstable connections at the wall receptacle or strip inlet.

Corrective Actions and Sign-Off

• Deficiencies documented with location and immediate hazard description
  Record each non-conformance, including the exact location and the observed unsafe condition.
• Immediate corrective action taken or escalation initiated
  Select the action taken in response to any deficiency.
• Inspector signature
  Inspector attestation that the inspection was completed accurately.