Run Power Strip Daisy Chain and Home Run Audit — Free

Inspection Details

Inspection scope and location documented

Record the room, row, rack, workstation, or electrical zone being inspected.

Inspector name and role recorded

Identify the person performing the inspection and their role or department.

Inspection date and time recorded

Capture when the inspection was performed.

Power Strip Feed Verification

Each power strip is connected to a dedicated receptacle or approved home run critical (required)

Verify the power strip is supplied by a dedicated circuit path and not shared through another strip or unapproved adapter.

Yes No N/A

No power strip is plugged into another power strip critical (required)

Confirm there is no daisy chaining of power strips, surge protectors, or multi-outlet devices.

Yes No N/A

Photo evidence (optional)

No extension cord is used to feed a power strip as a permanent installation critical (required)

Verify power strips are not being supplied by extension cords or temporary wiring in lieu of a proper receptacle/home run.

Yes No N/A

Power strip labeling or circuit identification is present where required

Check whether the strip or receptacle is identified to support traceability to the intended circuit or equipment load.

Yes No N/A

Load and Capacity Review

Connected load appears within the rated capacity of the power strip critical (required)

Verify the connected devices do not appear to exceed the strip's nameplate rating or visible load limit.

Yes No N/A

No signs of overheating, discoloration, or damaged plugs critical (required)

Inspect plugs, cords, and strip housing for heat damage, melting, scorch marks, or deformation.

Yes No N/A

Photo evidence (optional)

Power strip is mounted or positioned to avoid strain on plugs and cords

Confirm cords are not under tension, pinched, or routed in a way that could loosen connections or create damage.

Yes No N/A

Visible cord management does not create a trip or pinch hazard

Check that the cord path is controlled and does not create an immediate physical hazard in the work area.

Yes No N/A

Installation and Environmental Conditions

Power strips are not placed under carpets, rugs, or concealed in a way that impedes inspection critical (required)

Verify the strip and cord are visible and accessible for routine inspection and do not present a concealed overheating risk.

Yes No N/A

Power strip is free from liquid exposure, dust accumulation, or physical damage critical (required)

Inspect for environmental conditions that could compromise electrical safety or equipment integrity.

Yes No N/A

Photo evidence (optional)

Receptacle and plug connections are secure and fully seated

Confirm there are no loose, partially inserted, or unstable connections at the wall receptacle or strip inlet.

Yes No N/A

Corrective Actions and Sign-Off

Deficiencies documented with location and immediate hazard description

Record each non-conformance, including the exact location and the observed unsafe condition.

Immediate corrective action taken or escalation initiated

Select the action taken in response to any deficiency.

Note (optional)

Inspector signature critical (required)

Inspector attestation that the inspection was completed accurately.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Power Strip Daisy Chain and Home Run Audit

Inspection Details

Power Strip Feed Verification

Load and Capacity Review

Installation and Environmental Conditions

Corrective Actions and Sign-Off

Get your results